
En 124
ADVANCED SETUP menu items
X
Default settings are underlined.
Changing the speaker impedance setting (SP IMP.)
Change the unit’s speaker impedance settings depending on the impedance of the speakers
connected.
Settings
Selecting the remote control ID (REMOTE ID)
Change the unit’s remote control ID so that it matches the remote control’s ID (default: ID1).
When using multiple Yamaha AV receivers, you can set each remote control with a unique
remote control ID for its corresponding receiver.
Settings
ID1
, ID2
⬛ Changing the remote control ID of the remote control
1
To select ID1, hold down the cursor key (e) and SCENE (BD/DVD) together for 3 seconds.
To select ID2, hold down the cursor key (e) and SCENE (TV) together for 3 seconds.
Changing the FM/AM tuning frequency setting (TU)
(Taiwan, Brazil, Asia and General models only)
Change the FM/AM tuning frequency setting of the unit depending on your country or region.
Settings
Item Function Page
SP IMP. Changes the speaker impedance setting. 124
REMOTE ID Selects the unit’s remote control ID. 124
TU
(Taiwan, Brazil, Asia and General models only)
Changes the FM/AM tuning frequency setting.
124
TV FORMAT Switches the video signal type. 125
MON.CHK Removes the limitation on HDMI video output. 125
4K MODE Selects the HDMI 4K signal format. 125
INIT Restores the default settings. 125
UPDATE Updates the firmware. 126
VERSION Checks the version of firmware currently installed on the unit. 126
6 Ω MIN
Select this option when you connect 6-ohm speakers to the unit. You can also use
4-ohm speakers as the front speakers.
8 Ω MIN
Select this option when you connect 8-ohm or higher speakers to the unit.
FM100/AM10
Select this when you want to adjust the FM frequency by 100-kHz steps and AM by
10-kHz steps.
FM50/AM9
Select this when you want to adjust the FM frequency by 50-kHz steps and AM by
9-kHz steps.
REMOTE IDÕÕ+&
67ÕÕÕÕ(/#/
Comments to this Manuals