Yamaha RX-V367 Manual download pdf (Page 39)

En 39

SETUP

Setting various functions (Setup menu)

■

Adjusting sound quality with the equalizer

Adjusts sound quality of tone using a parametric or graphic

equalizer.

EQ Select

Select an equalizer type.

■

Generating test tones

Turns the test tone generator on or off.

Equalizer

PEQ Uses the parametric equalizer to adjust sound quality.

Selecting this setting applies the tone settings

obtained using YPAO (☞p. 21). J1

GEQ (Default) Uses the graphic equalizer to adjust sound quality. By

pressing jENTER, you can adjust the

characteristics of the graphic equalizer.

Off Does not activate the equalizer.

■ Adjusting the graphic equalizer

When “EQ Select” is displayed, use jCursor D / E

to select “GEQ” and press jENTER.

Check that “Channel” appears and use jCursor

D / E to select the speaker for which you want to

adjust the equalizer.

SL SR

Channel;FRNT L

GEQ

VOL.

The speaker you are adjusting

Press jCursor C repeatedly to select the

frequency you want to adjust, then use jCursor D

/ E to adjust the volume.

Raising volume: Press jCursor E.

Lowering volume: Press

jCursor D.

When you have finished making adjustments,

press iSETUP to close the Setup menu.

SL SR

63Hz

GEQ

VOL.

Frequency band Setting the volume level for

the selected frequency

Frequency

range

63 Hz/160 Hz/400 Hz/1 kHz/2.5 kHz/6.3 kHz/

16 kHz

Adjustable

range

-6.0 dB to 0 dB to +6.0 dB

Default setting 0 dB

Adjustment

increments

0.5 dB

You can use jCursor B / C to select another frequency or

return to step 2. Repeat steps 2-3 to adjust the tone to your

liking.

Test Tone

Off (Default) Does not generate test tones.

On Generates test tones. While “On” is selected, test

tones are produced constantly.

You can use the test tone in a variety of circumstances. For

example, you can adjust the volume balance settings for each

speaker, or whenever you adjust the settings on the internal

graphic equalizer, you can listen to the actual effect while

operating this unit. Turn the test tone off when you have finished

making adjustments.

1 : Using YPAO to carry out acoustic measurement selects “PEQ” automatically.

“PEQ” does not appear if the measurement process has not been carried out at

least once.

1 ... 38 39 40 ... 69

Comments to this Manuals

No comments

Yamaha RX-V367 Manual Page 39

Comments to this Manuals

Related products and manuals for AV receivers Yamaha RX-V367