
OVERVIEW screen
Reference Manual
-
46
-
4 Displays the OUTPUT screen. (page 78)
5 Displays the CH VIEW screen. (page 68)
Group channels
1 Displays the DCA ASSIGN screen. (page 81)
2 Displays the CH VIEW screen. (page 68)
FADER section
1 ON button
Turns the channel on and off.
2 Fader
Adjusts the channel’s fader level.
3 CUE button
Turns the cue on and off for the assigned channel.
4 Displays the CH VIEW screen. (page 68)
NOTE
• MATRIX channels 1–4 are in the OUTPUT FADER BANK. To use the faders on the top panel to control
these channels, press the [OUTPUT] key in the FADER BANK section, and then display the OUTPUT
BANK in the channel strip.
• For TF1, MATRIX channels 1–4 are not controlled by the faders, and are displayed only. Scroll the
displayed area to the right. To control these channels using the faders, register them to the CUSTOM
FADER BANK.
OVERVIEW screen operations
When you touch an item on the screen, a pink box is displayed around the item to highlight it.
When an item is highlighted, you can adjust it using the [TOUCH AND TURN] knob.
If you touch a highlighted item, its configuration screen is displayed.
You can drag or swipe up, down, left, and right to display other areas of the screen.
Comments to this Manuals