Yamaha QL5 Owner's Manual download pdf (Page 32)

Connection

Owner’s Manual

Audio input/output

connections

Analog input connections

INPUT jacks on the console and I/O devices are used

mainly to connect microphones or monaural line-level

devices.

Analog output connections

To the OMNI OUT jacks on the QL series and the

OUTPUT jacks on I/O devices, you can patch the output

signals from output channels [MIX, MATRIX, STEREO

(L/R), MONO (C)], monitor signals (MONITOR OUT

L/R/C channels), and the direct out signals of the input

channels. For information about patches, refer to

“Patching the mixer output to the I/O device” (see

page 35) in the Quick Guide section.

The console’s front panel has a PHONES OUT jack for

monitoring, and this jack always lets you monitor the

signal that is selected as the monitoring source. By

assigning the MONITOR OUT L/R/C channels to the

desired output jacks, you can also monitor the same

signal through external speakers.

Rio3224-D

QL series

Rio3224-D

Main speakers

Monitor speakers

QL series

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 57 58

No comments

Yamaha QL5 Owner's Manual Page 32