Yamaha SW1000XG Specifications Page 51

  • Download
  • Add to my manuals
  • Print
  • Page
    / 59
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 50
NOTE: PCI bus IRQ steering is disabled by default in OSR2. If you are using OSR2, and IRQ
steering is disabled, verify that the Use IRQ Steering check box is selected on the IRQ Steering
tab.
IRQ Steering may be displayed as disabled in Device Manager for any of the following reasons:
The IRQ routing table that must be provided by the BIOS to the operating system may be missing
or contain errors. The IRQ routing table provides information on how the motherboard is
configured for PCI IRQ's.
The Use IRQ Steering check box is not selected.
The "Get IRQ table from Protected Mode PCIBIOS 2.1 call" check box is not selected. Your
computer's BIOS may not support PCI bus IRQ steering. For more information, contact the
manufacturer of your BIOS.
362 Question: Can I install the SW1000XG with a SoundBlaster then, as I would like to keep
running DOS games as well as Win95 games with XG?
Answer: Yes, so long as the IRQ doesn’t clash you can still run your old ISA bus
SoundBlaster card at the same time. But stop and think about it. Games playing and general
day to day use of the PC should be kept totally separate from your serious music applications
work. If your PC is running slow, it’s not our card, it could be the multitude of apps that certain
large corporations like to throw all over your system that is causing the slowdown.
363 Question: Why am I experiencing problems with the audio playback in some of my Windows
95 games?
Answer: It is not a games card. Get a games card such as the WF192 for this.
364 Question: Which speakers are recommended for use with the Yamaha SW1000XG?
Answer: Personally, get the best you can lay your hand on. Cheap speakers will do it no
justice at all. They must be powered though or have an amplifier attached to them.
365 Question: Is the SW1000XG full duplex capable and what is full duplex anyway?
Answer: Yes it is. Full duplex is the ability for a soundcard to record and playback audio at the
same time. The SW1000XG is able to do this and maintain full bit value 44.1kHz when doing it
in both directions. Unlike some cards which have to switch to 8bit/16-bit to perform this task (for
example, the AWE32 and AWE64).
366 Question: Is the WF192XG full duplex also?
Answer: Yes.
367 Question: And the DS2416?
Answer: Indeed it is.
368 Question: Can I playback all 12 channels of audio on the SW1000XG whilst recording two
more?
Answer: Yes.
369 Question: What wave file types is SW1000XG compatible with, and what can it play back?
Answer: Pretty much anything that you throw at it. Most of the supported sample rates of
audio apps such as Soundforge or Wavelab are supported, although one or two of the more
non-standard ones may not work.
370 Question: Does the SW1000XG or DSP Factory support 192kHz or 96kHz
playback/recording?
Answer: Not as yet.
Page view 50
1 2 ... 46 47 48 49 50 51 52 53 54 55 56 57 58 59

Comments to this Manuals

No comments