Yamaha DSP-AX863SE Owner's Manual Page 100
- Page / 126
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
TROUBLESHOOTING
98 En
Refer to the table below when this unit does not function properly. If the problem you are experiencing is not listed below
or if the instruction below does not help, turn off this unit, disconnect the power cable, and contact the nearest authorized
Yamaha dealer or service center.
■ General
Troubleshooting
Problem Cause Remedy
See
page
This unit fails to turn
on or enters the
standby mode soon
after the power is
turned on.
The power cable is not connected or the
plug is not completely inserted.
Connect the power cable firmly. —
The speaker impedance setting is incorrect. Set the speaker impedance to match your speakers. 27
The protection circuitry has been activated. Make sure that all speaker wire connections on this
unit and on all speakers are secure and that the wires
for each connection do not touch anything other than
their respective connections.
14
This unit has been exposed to a strong
external electric shock (such as lightning or
strong static electricity).
Set this unit to the standby mode, disconnect the power
cable, plug it back in after 30 seconds and then use this
unit normally.
—
No sound. Incorrect input or output cable connections. Connect the cables properly. If the problem persists,
the cables may be defective.
20-26
The optimizer microphone is connected. Disconnect the optimizer microphone. 31
Audio input jack select is set to “HDMI”,
“COAX/OPT” or “ANALOG”.
Set Audio input jack select to “AUTO”. 43
Audio input jack select is set to
“ANALOG” while playing a source
encoded in Dolby Digital or DTS.
Set Audio input jack select to “AUTO” or
“COAX/OPT”.
43
No appropriate input source has been
selected.
Select an appropriate input source with the INPUT
selector on the front panel (or the input selector
buttons on the remote control).
41, 42
Speaker connections are not secure. Secure the connections. 14
The front speakers to be used have not been
selected properly.
Select the front speakers by pressing
A
SPEAKERS
on the front panel repeatedly.
42
The volume is turned down. Turn up the volume. —
The sound is muted.
Press
G
MUTE or
G
VOLUME +/– on the remote
control to resume audio output and then adjust the
volume.
44
Signals this unit cannot reproduce are
being input from a source component, such
as a CD-ROM.
Play a source whose signals can be reproduced by this
unit.
—
The HDMI components connected to this
unit do not support the HDCP copy
protection standards.
Connect HDMI components that support the HDCP
copy protection standards.
18
“S.AUDIO” is set to “OTHER” and
“HDMI” audio signals are not being played
back on this unit.
Set “S.AUDIO” to “DSP-AX863SE” in “MANUAL
SETUP”.
82
No picture. The output and input for the picture are
connected to different types of video jacks.
Set “VIDEO CONV.” to “ON” or connect your source
components in the same way as you connect your
video monitor to this unit.
79
Non-standard video signals are input.
The sound suddenly
goes off.
The protection circuitry has been activated
because of a short circuit, etc.
Check that the speaker impedance setting is correct. 27, 95
Check that the speaker wires are not touching each
other and then turn this unit back on.
—
The sleep timer has turned this unit off. Turn this unit on, and play the source again. —
The sound is muted.
Press
G
MUTE or
G
VOLUME +/– on the remote
control to resume audio output.
44
Sound is heard from
the speaker on one
side only.
Incorrect cable connections. Connect the cables properly. If the problem persists,
the cables may be defective.
14
Incorrect settings in “SP LEVEL”. Adjust the “SP LEVEL” settings. 70
- DSP-AX863SE 1
- ■ For U.K. customers 2
- Contents 3
- Features 4
- Getting started 6
- Step 1: Set up your speakers 8
- ■ For further connections 9
- Step 3: Press SCENE 1 button 10
- Quick start guide 11
- Connections 12
- Placing speakers 13
- ■ 6.1-channel speaker layout 14
- ■ 5.1-channel speaker layout 14
- ■ Using presence speakers 15
- Connecting speakers 16
- PREPARATION 17
- 2 Loosen the knob 18
- ■ Audio jacks 19
- ■ Video jacks 19
- Information on HDMI™ 20
- Audio and video signal flow 21
- AC OUTLET 22
- ■ Connecting a DVD player 23
- ■ Connecting a set-top box 24
- ■ Connecting audio components 25
- SUBWOOFERFRONT 26
- SUR. BACKSURROUND 26
- SINGLE CENTER 26
- L R LRL R 27
- REMOTE OUT 28
- SILENT CINEMA 28
- ■ AC OUTLET (SWITCHED) 29
- TONE CONTROL 29
- Turning this unit on and off 30
- Front panel display 31
- SL SB SR 32
- Using AUTO SETUP 33
- 4 Press 34
- 5 Press 34
- 6 Press 34
- 7 Press 35
- 8 Press 35
- 2 Press 37
- 3 Press 37
- Selecting the SCENE templates 38
- Creating your original SCENE 41
- Playback 43
- Selecting the MULTI CH INPUT 44
- Selecting audio input jacks 45
- (AUDIO SELECT) 45
- Using your headphones 46
- Muting the audio output 46
- Playing video sources in the 46
- Displaying the input source 47
- Using the sleep timer 48
- Sound field programs 49
- ■ For various sources 50
- ■ For movie sources 50
- ■ Surround decode mode 51
- Enjoying unprocessed input 52
- Using audio features 53
- Using iPod™ 54
- Using Bluetooth™ components 56
- Recording 57
- [p]/[[]: 58
- REV.TIME 62
- REV.DELAY 62
- REV.LEVEL 62
- Selecting decoders 63
- ■ Decoder descriptions (SUR.) 64
- ■ Auto setup AUTO SETUP 65
- ■ Manual setup MANUAL SETUP 65
- D)INIT. CONFIG 68
- E)HDMI SET 68
- Using SET MENU 69
- 1 BASIC MENU 70
- ■ Speaker level B)SP LEVEL 72
- ■ Test tone D)TEST TONE 73
- 2 VOLUME MENU 74
- 3 SOUND MENU 75
- ■ Low-frequency effect level 76
- (lip sync) 77
- 4 INPUT MENU 78
- 1 Press 79
- 5 OPTION MENU 81
- [ENTER]: 82
- ■ Memory guard C)MEMORY GUARD 83
- ■ HDMI set E)HDMI SET 84
- Remote control features 85
- TV VOL TV CH 86
- Setting remote control codes 87
- Programming codes from other 89
- Changing source names in the 90
- Macro programming features 91
- ■ Default macro functions 92
- Clearing configurations 94
- 3 Press and hold 95
- ■ Clearing a macro function 96
- Advanced setup 97
- PRESET/CH 98
- ■ Monitor check MON.CHK 99
- Troubleshooting 100
- ADDITIONAL 101
- INFORMATION 101
- ■ Remote control 103
- ■ Bluetooth 104
- ■ AUTO SETUP 105
- Resetting the system 107
- Glossary 108
- ■ Elements of a sound field 111
- ■ CINEMA DSP 111
- ■ SILENT CINEMA 111
- ■ Virtual CINEMA DSP 111
- ■ Compressed Music Enhancer 111
- Specifications 112
- CDEFGHIJ 118
- List of remote control codes 120
- APPENDIX 121
- SATELLITE TUNER 121
- TAPE DECK 121
- DSP-AX863SE/DSP-AX763 125
- Printed in Malaysia 126
Related products and manuals for Audio amplifiers Yamaha DSP-AX863SE
Audio amplifiers Yamaha TX6n Owner's Manual
(24 pages)
(24 pages)
Audio amplifiers Yamaha P3200 Owner's Manual
(42 pages)
(42 pages)
Audio amplifiers Yamaha HA8 Owner's Manual
(11 pages)
(11 pages)
Audio amplifiers Yamaha P-2201 User Manual
(11 pages)
(11 pages)
Audio amplifiers Yamaha DG-1000 User Manual
(42 pages)
(42 pages)
Audio amplifiers Yamaha AP-U70 User Manual
(16 pages)
(16 pages)
Audio amplifiers Yamaha MX-A5000 User Manual
(12 pages)
(12 pages)
© 2020, manymanuals.com. All rights reserved. | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals