Yamaha MT120 User Manual download pdf (Page 26)

PUNCH-IN/OUT RECORDING

Punch-in/out recording makes it possible to re-record a short segment of an otherwise perfect track in order to correct a

mistake or “brush up” an important passage. You “punch-in” at the point where you begin recording the new segment, and

“punch-out” at the end of the new segment so that the previously-recorded material is not erased.

Punch-in/out Using the REC SELECT Switches

With all REC SELECT switches set to OFF, start the

recorder running —

a few measures before the section

to be re-recorded begins — in the record-ready mode

by pressing the REC/PAUSE button and then the PLAY

button with all track REC SELECT switches set to OFF.

The red REC/PAUSE LED will flash indicating that the

transport is in the record-ready mode. The MONITOR

SELECT switch should be set to MONITOR so you can

hear all the tracks.

2. At a convenient break in the track switch the track to be

corrected to the record mode (punch-in by switching the

REC SELECT switch for that track to the appropriate

record position) and start playing the new material to be

recorded. The REC/PAUSE LED will light continuously

as soon as the REC SELECT switch is set to a record

position.

At the end of the re-recorded segment switch the track

back to the play mode (punch-out by switching the REC

SELECT switch for that track to OFF). The red REC/

PAUSE LED will begin to flash.

Footswitch Punch-in/out

Plug a YAMAHA FC4 or FC5 (optional) footswitch into

the MT120 PUNCH l/O jack.

2. Set the REC SELECT switch for the track to be punched-

in to the appropriate record position, and press the

REC/PAUSE button to activate the rec/pause mode.

The red REC/PAUSE LED should flash instead of light-

ing continuously. If the red REC/PAUSE LED lights

continuously, press the footswitch once so that it flashes.

If the LED lights continuously, press the footswitch once

so that it flashes.

CAUTION:

WHEN USING A FOOTSWITCH, MAKE SURE

THE RED REC/PAUSE LED LIGHT IS FLASHING,

NOT STEADY BEFORE PUTTING THE TRANS-

PORT IN RECORD. THIS WILL PREVENT ACCI-

DENTAL ERASURE OF EXISTING MATERIAL.

DO NOT PRESS REC/PAUSE AND PLAY.

Press the PLAY button to start the transport running in

the record-ready mode.

Press the footswitch to punch-in. The red REC/PAUSE

LED will light continuously.

Press the footswitch a second time to punch-out. The

red REC/PAUSE LED will begin to flash.

TRACK 1

TRACK 2

TRACK 3

TRACK 4

STOP

All tracks monitored in PLAY-

BACK mode (the deck is in the

REC mode, but the track REC

SELECT switches are set to

OFF).

The record mode is engaged

for track 3 only when the track

3 REC SELECT switch is set

to an ON position.

Begin playback

It's a good idea to actually start playing a little

before the punch-in point.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments

Yamaha MT120 User Manual Page 26

Comments to this Manuals

Related products and manuals for Voice Recorders Yamaha MT120