Yamaha NY64 Owner's Manual download pdf (Page 11)

Owner’s Manual

NY64-D

How to read the [SYNC] indicators

You can use the [SYNC] indicators to confirm the card's status.

The indicators can relay operational status, and error status.

Operational status

The [SYNC] indicators light as follows when the card is operating normally.

Error status

The [SYNC] indicators light as follows when an error has occurred.

Refer to the "Solution" information for ways to resolve the error.

[SYNC] indicators Description Meaning

Sync in progress. The card is syncing with the

Dante network. Wait until the

card is in sync. (This may take

up to 45 seconds.)

Clock master, functioning

normally.

The card is functioning as the

clock master.

Clock slave, functioning

normally.

The card is functioning as the

clock slave and is in sync.

[SYNC] indicators Description Solution

Clock settings are incorrect. Either turn on the TF series

console's Quick Config feature,

or check the clock master and

sampling frequency settings of

the Dante Controller.

Card not connected to Dante

network.

Make sure the cables are not

damaged and that they are

connected properly.

LitOff

Flashing Off

Lit

Off

FlashingOff

Flashes 2 timesOff

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 17

No comments

Yamaha NY64 Owner's Manual Page 11