Yamaha KMA-1080 Owner's Manual Page 16

  • Download
  • Add to my manuals
  • Print
  • Page
    / 22
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 15
14 En
Menus in Setup mode
You can set the following menus in Setup mode:
1. Power ON recall
Select Last memory or Preset, to recall the settings of MIC
volume/ECHO amount/MUSIC volume/ECHO MODE
when the unit is turned on.
Last memory*: The settings when the unit was turned off
last are recalled.
Preset: The settings saved to PRESET 1 are recalled.
2. Input mode
Set Input mode to Auto or Manual.
Auto*: The input source is set automatically.
Manual: The input source is selected by INPUT.
Source is selected in order of DVD, AUX**, TAPE, BGM.
3. Auto input condition
Set the conditions for each source (DVD, AUX** and
TAPE) for Auto Input mode described in 2.
Audio*: The source is switched based on audio signal.
Video: The source is switched based on video signal.
Audio/Video: The source is switched based on audio or
video signal.
For only this menu, select desired source by INPUT
before selecting the desired item.
4. ECHO MODE auto reset
Select whether the selected ECHO MODE is reset or not
after the current song has finished. The unit assumes songs
have finished when over 4 seconds of silence occurs.
Off*: The unit retains the last selected ECHO MODE.
On: The ECHO MODE is reset to the mode that is
recalled when this unit is turned on. Refer to “Power ON
recall” on this page.
5. Remote mode
Set the light receiving device.
Front&Ext.*: Both the front panel and external remote
control satellite receive the signal from the remote control.
Front: Only the front panel receives the signal.
Ext.: Only the external remote control satellite receives
the signal.
Disable: The remote control is disabled.
6. MIC/MUSIC max level
Set the maximum volume of MIC and MUSIC.
10*: No setting.
9 to 3: The maximum volume is set to the level indicated
(2 to 0 cannot be set).
7. MIC/MUSIC volume select
Select how MIC and MUSIC volumes increase/decrease
(i.e., the volume curve) when the controls are turned.
Pattern 1: Steep curve
Pattern 2*: Less steep curve
Pattern 3: Least steep curve, and is most suitable for fine
adjustment.
8. Ext Output select
Set the output signals from PRE OUT/SPEAKERS.
Normal*: PRE OUT/SPEAKERS output both of the mic/
music signals.
Separate: PRE OUT outputs music; SPEAKERS outputs
mic signals.
9. Power Amplifier mode
You can also use this unit as a 2ch power amplifier. Most
of the functions on this unit are not available in Power
Amplifier mode. The default setting is Normal (Digital
Karaoke Mixing Amplifier). See the CAUTION on
page 17.
10. Initializing
Reset all the settings set in Setup mode to the defaults.
Cancel: Initializing is not executed.
Initialize: Initializing is executed.
When pressing KEY CONTROL with MUSIC set to 3,
Initializing is executed.
To set each menu above, set the corresponding controls as
shown in the “Setup mode table” on pages 15 to 16
according to the following procedure.
1 To enter Setup mode, turn off the main unit
and press / while pressing KEY CONTROL
and ECHO MODE.
2 Set KEY CONTROL and MUSIC according to
the “Setup mode table” on page 15 to set
desired menus and items.
For Auto input condition, select the desired source
before selecting the item.
Set all settings you want to change before moving to step 3.
3 Press KEY CONTROL to enter the settings.
” blinks once when the settings are entered.
4 To terminate Setup mode, turn off the main
unit.
SETUP MODE
* Default setting
** KMA-1080 only
Page view 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22

Comments to this Manuals

No comments