Yamaha HTR-8063 Manual download pdf (Page 6)

● Receiver doesn’t power up after the update.

● Or, “ERROR” appeared when confirming the firmware version.

Recovery method using USB method:

1. Unplug the AC power cable from wall outlet.

2. Insert the USB thumb drive which has the firmware data stored inside, into the USB port

located on the front panel.

3. Press and hold the PURE DIRECT button and keep it pressed while you plug the AC

power cable back into the wall outlet again.

“

USB UPDATE

” will appear on the front display. Then, release the PURE DIRECT

button.

4. The update will start automatically.

5. When “

UPDATE SUCCESS

” appears on the display, firmware update is completed.

Power off the receiver and remove the USB thumb drive.

6. Confirm updated firmware version.

Troubleshooting

Cause:

For some reason, the receiver can’t read the firmware data.

Method:

For your solution, check the following

[Update through Internet]

❏

Check Internet connection.

Your Internet connection is working by playing an Internet radio station.

(See owner’s manual for details)

[Update by USB thumb drive]

❏

USB thumb drive is connected properly to the receiver.

❏

USB thumb drive is not password protected.

(AV receiver cannot read data from a security protected USB thumb drive)

❏

Make sure the USB thumb drive is inserted before the receiver is powered on for the up-

date.

❏

The firmware data, RX–V1067-xxxx.bin is stored in the root directory of the USB thumb

drive.

❏

There is no other data except the firmware data in the USB thumb drive.

❏

No folders are created in the USB thumb drive.

Else, retry the update by USB using another USB thumb drive.

“UPDATE FAIL” appeared during the update

Firmware update doesn’t start for other reasons

CASE 1

CASE 2

USB port

PURE DIRECT button

USB UPDATE UPDATE SUCCESS

RX-V1067

1 2 3 4 5 6

Comments to this Manuals

No comments

Yamaha HTR-8063 Manual Page 6

Comments to this Manuals

Related products and manuals for Unknown Yamaha HTR-8063