Yamaha Dante-MY16 User Manual download pdf (Page 7)

Dante-MY16-AUD2 Getting Started Guide- 6 -

Getting Started

Dante Controller

Dante Virtual Soundcard

Connection Examples

To get started with your Dante-MY16-AUD2 card, you will need to:

•

Install your card – please refer to the User manual for the relevant Yamaha equipment for instructions.

•

Download and install the Dante Controller audio routing software.

•

Download, install and activate Dante Virtual Soundcard – to use with to a PC or Mac audio application.

•

Set up your Ethernet network.

•

Configure your Dante device and clock settings.

•

Set up audio routing.

Dante Controller is a free software application for Windows and OS X that allows you to configure your

Dante-MY16-AUD2 card, set up audio routing, and monitor and manage a network of Dante-enabled devices.

Dante Controller can be downloaded the Downloads > Firmware and Software section of the Yamaha Pro

Audio website: www.yamahaproaudio.com

For information on how to use Dante Controller (including the minimum system requirements), refer to the Dante

Controller User Guide, which is installed with the application, and also available online at the Yamaha Pro Audio

website.

Dante Virtual Soundcard uses the standard Ethernet port on your PC or Mac to turn your computer into a Dante-

enabled device on the network. Dante Virtual Soundcard allows applications such as Cubase, Nuendo, Pro Tools

and other audio processing, recording or playback applications to directly send and receive audio to and from

other Dante devices over the network, without the need for any additional hardware.

Dante Virtual Soundcard can be downloaded the Downloads > Firmware and Software section of the Yamaha

Pro Audio website: www.yamahaproaudio.com

For information on how to use Dante Virtual Soundcard (including the minimum system requirements), refer to

the Dante Virtual Soundcard User Guide, which is also available from the Yamaha Pro Audio website. In order

to activate Dante Virtual Soundcard, you will need the DVS Token printed on the ‘Download your software’ card

included with your hardware. Refer to ‘Activating Dante Virtual Soundcard’ (later in this guide) for information

about how to activate Dante Virtual Soundcard.

You can also use Dante Via to route Dante audio - see www.audinate.com for more information.

Example 1: Connect a Dante-MY16-AUD2 card to your PC or other Dante-enabled equipment directly using a

standard Cat5 or Cat6 Ethernet cable:

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

Yamaha Dante-MY16 User Manual Page 7