Yamaha AW4416 Specifications download pdf (Page 38)

MIDI data format

Version 2.0 Manual Supplement

2.1.5 OUT/THRU

Select whether the MIDI OUT/THRU connector will

function as OUT or as THRU.

If THRU is selected, messages received at the MIDI IN

connector will be re-transmitted without change from the

MIDI OUT/THRU connector.

Regardless of the MIDI/HOST setting, the connector will

function as a THRU connector if the THRU setting is

selected. If you want to use the connector as MIDI OUT,

the MIDI/HOST setting must be OUT.

2.1.6 TO HOST

If the TO HOST connector is selected, choose one of

three settings depending on the type of computer that is

connected.

2.1.7 MIDI Clock ON/OFF

Specify whether MIDI Clock will be used.

If this is ON, MIDI Clock will be transmitted from the

connector selected by MIDI/HOST.

2.1.8 MTC ON/OFF

Select whether MTC will be used.

If this is ON, MTC will be transmitted from the connector

selected by MIDI/HOST.

Regardless of this setting, MTC will always be transmitted

from the MTC OUT connector.

2.2 Program change assign table

This table allows you to freely specify the correspon-

dence between Program Change No. and Scene No.

This table is used for conversion for both transmission

and reception.

2.3 Control change assign table

This table allows you to freely specify the correspon-

dence between Control Change No. and Parameter

name.

This table is used for conversion for both transmission

and reception.

3. MIDI format list

3.1 CHANNEL MESSAGE

command rx/tx function

-------------------------+-----+---------------------------------------

8n NOTE OFF rx Control the internal effect

9n NOTE ON rx Control the internal effect

CONTROL CHANGE

rx/tx Edit parameters (use the Control

Change Assign Table)

PROGRAM CHANGE

rx/tx Switch scene memories (use the

Control Change Assign Table)

3.2 SYSTEM COMMON MESSAGE

command rx/tx function

-------------------------+-----+---------------------------------------

MIDI TIME CODE

rx/tx MTC transmission (when MTC

Master), MTC reception (when

MTC slave)

SONG POSITION POINTER

tx SPP reception (when MIDI Clock

is used)

3.3 SYSTEM REAL TIME MESSAGE

command rx/tx function

-------------------------+-----+---------------------------------------

F8 TIMING CLOCK tx MIDI Clock transmission (when

MIDI Clock is used)

FA START tx Start command transmission

(when MIDI Clock is used)

FB CONTINUE tx Continue command transmission

(when MIDI Clock is used)

FC STOP tx Stop command transmit (when

MIDI Clock is used)

FE ACTIVE SENSINGrx Check MIDI cable connections

FF RESET rx Clear running status

3.4 SYSTEM EXCLUSIVE MESSAGE

3.4.1 Real Time System Exclusive

3.4.1.1 MMC

command rx/tx function

-------------------------+-----+---------------------------------------

01 STOP rx/tx Transport stop

02 PLAY rx

Transport play

03 DEFERRED PLAY rx/tx Transport play

04 FAST FOWARD rx/tx Transport fast-forward

05 REWIND rx/tx Transport rewind

RECORD STROBE

rx Transport punch-in record

07 RECORD EXIT rx Transport punch-out

0F RESET rx/tx MMC reset

40 WRITE rx Write data ﬁeld

44 LOCATE rx/tx Transport locate

3.4.2 Bulk Dump & Request

data

name rx/tx function

-----+-------+------------------------------------

'M' rx/tx Scene Memory & Request

'S' rx/tx Setup Memory & Request

'R' rx/tx Remote Memory & Request

'Q' rx/tx Equalizer Library & Request

'Y' rx/tx Dynamics Library & Request

'E' rx/tx Effect Library & Request

'T' rx/tx Patch Library & Request

'H' rx/tx Channel Library & Request

'A' rx/tx Automix Memory & Request

'P' rx/tx Program Change Assign Table & Request

'C' rx/tx Control Change Assign Table & Request

3.4.3 Parameter Change

Parameter

type rx/tx function

-----+-------+------------------------------------

0x00 rx/tx edit buffer (byte operation format)

0x01 rx system memory (byte operation format)

0x02 rx/tx function call (mem/lib recall,mem/lib

store)

0x10 rx/tx edit buffer (7bit operation format)

0x40 rx/tx edit buffer (bit operation format)

0x41 rx system memory (bit operation format)

0x43 rx controller (key remote) (bit opera-

tion format)

4. MIDI format details

4.1 NOTE OFF (8n)

< Reception >

Received when [Rx CH] matches.

Used to control effects. Refer below for details.

STATUS 1000nnnn 8n Note Off Message

DATA 0nnnnnnn nn Note No.

0vvvvvvv vv Velocity ( ignored)

4.2 NOTE ON (9n)

< Reception >

Received when [Rx CH] matches.

Used to control effects. Refer below for details.

Velocity of 0x00 is equivalent to Note-Off.

STATUS 1001nnnn 9n Note On Message

DATA 0nnnnnnn nn Note No.

0vvvvvvv vv Velocity (1-127:On, 0:off)

* Effect control by Note

1: Dynamic Flange/Dynamic Phase/Dynamic Filter

When the SOURCE parameter is set to MIDI, the note

velocity (both note-on and note-off) is used to control the

Modulation frequency width.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 47 48

Comments to this Manuals

No comments

Yamaha AW4416 Specifications Page 38

Comments to this Manuals

Related products and manuals for TVs & monitors Yamaha AW4416