Yamaha N470D User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
2 En
Right speaker
This unit
Supplied antenna
Secure using pins
PREPARATION
Connecting speakers
Speakers and speaker cables are not included with this unit. If connecting a subwoofer,
connect one with a built-in ampli er to the [SUBWOOFER] on the rear panel.
CAUTION
Use speakers with an impedance of at least 6 Ω.
1 Remove the insulation from the ends of the speaker cables to expose the
bare wires.
2 Connect the speakers to the unit as
shown in the gure at left.
Ensure that the left and right speakers
are connected to the left and right (L, R)
jacks respectively, and that the polarity of
the wires is correct (red: +, black: –).
CAUTION
Be careful not to allow the right and left bare speaker wires to touch
each other or other metal parts. Doing so could damage this unit and
the speakers.
Connecting the antenna
1 Connect the supplied antenna as shown in the gure at left.
2 Secure it with pins or other supports in the location with best reception.
Turning on the power
After all the connections are
completed, turn on the power.
Plug the power cable into a
power outlet, and press
.
Note
When the power of the unit is turned on for the rst time after
purchase, the network settings preparation message (Share WiFi Set)
may appear, but this message disappears as soon as any operations
are performed.
For details on the network settings preparation message, see “Turning
on the power” in the Owner’s Manual.
15 mm (5/8 in.)
Left speaker
Page view 5
1 2 3 4 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments