Yamaha QL5/QL1 Firmware User Manual download pdf (Page 12)

QL5/QL1 Firmware Update Guide 12

7. Select [Start]→[All programs]→[Audinate]→[Dante Firmware Update Manager]→[Dante Firmware

Update Manager ] , then right-click and select “Run as Administrator.”

The Dante Firmware Update Manager will start up.

・ The "User Account Control" dialog box may appear. Click [Continue] or [Yes].

8. If you see the interface selection screen, select the interface card to connect the Dante device.

9. Click [Failsafe Recovery].

10. Check the detected QL.

11. Click [Start].

A pop-up is displayed confirming that you wish to proceed.

12. Click [OK] to start the recovery.

Firmware Update Manager will display "Processing Safe Recovery", and then "Safe recovery Done" when the

device(s) are recovered.

13. Exit the Dante Firmware Update Manager, and wait for two minutes before turning off the power to

the QL main unit.

14. The correct Dante firmware now needs to be loaded.

Follow steps 2 through 9 described in "Updating the Dante firmware."

Now recovery and firmware update are completed.

C.S.G., PA Development Division

1 2 ... 7 8 9 10 11 12

No comments

Yamaha QL5/QL1 Firmware User Manual Page 12