Yamaha YDP223 Manual download pdf (Page 42)

YDP-223 Detailed Settings – [FUNCTION]

ENGLISH

Program Change ON/OFF

Normally the YDP-223 will respond to MIDI program

change numbers received from an external keyboard or

other MIDI device, causing the correspondingly-num-

bered voice to be selected on the corresponding channel

(the keyboard voice does not change). The YDP-223 will

normally also send a MIDI program change number

whenever one of its voices is selected, causing the corre-

spondingly-numbered voice or program to be selected

on the external MIDI device if the device is set up to

receive and respond to MIDI program change numbers.

This function makes it possible to cancel program

change number reception and transmission so that

voices can be selected on the YDP-223 without affecting

the external MIDI device.

Setting range: ON/OFF

Normal setting: ON

Control Change ON/OFF

Normally the YDP-223 will respond to MIDI control

change data received from an external MIDI device or

keyboard, causing the voice on the corresponding chan-

nel to be affected by pedal and other “control” settings

received from the controlling device (the keyboard voice

is not affected).

The YDP-223 also transmits MIDI control change infor-

mation when the pedal or other appropriate controls are

operated.

This function makes it possible to cancel control change

data reception and transmission so that, for example, the

YDP-223’s pedal and other controls can be operated

without affecting an external MIDI device.

Setting range: ON/OFF

Normal setting: ON

MIDI Transmit Transpose

This function allows the MIDI note data transmitted by

the YDP-223 to be transposed up or down in semitone

increments by up to plus or minus 12 semitones. The

pitch of the YDP-223 itself is not affected.

Setting range: -12 – 0 – 12 (in semitones)

Normal setting: 0

Panel/Status Transmit

This function causes all the current YDP-223 panel set-

tings (selected voice, etc.) to be transmitted via the MIDI

OUT terminal. This is particularly useful if you will be

recording performances to a MIDI sequence recorder,

such as the Yamaha MIDI Data Filer MDF3, which will

be used to control the YDP-223 on playback. By trans-

mitting the YDP-223 panel settings and recording them

on the MIDI sequence recorder prior to the actual per-

formance data, the YDP-223 will be automatically

restored to the same settings when the performance is

played back.

Procedure

1. Set up the panel controls as desired.

2. Connect the YDP-223 to a sequencer via MIDI, and

set up the sequencer so it can receive the setup data.

3. Engage Function mode and select .

4. Press the [+/YES] button to transmit the panel/status

data.

will appear on the LED display when the data has

been successfully transmitted.

TIP

For information on program change numbers for each of the

YDP-223’s voices, refer to page 61 in the MIDI Data Format

section.

TIP

For information on control changes that can be used with the

YDP-223, refer to the MIDI Data Format on page 61.

TERMINOLOGY

Setup Data:

Data that contains a set of panel settings for the YDP-223.

TIP

See page 62 for a list of the “Panel Data Contents” transmit-

ted by this function.

TIP

Receiving the transmitted data:

1. Connect the YDP-223 via MIDI to the device to which the

setup data was transmitted previously.

2. Start sending the setup data from the device.

The YDP-223 automatically receives the setup data, which

will be reﬂected in the panel settings.

(For the data to be accepted, the YDP-223 that receives the

setup data should be the same model as the one that trans-

mitted the setup data to the sequencer.)

TIP

For more information on transmitting and receiving setup

data via MIDI, refer to the owner’s manual for the connected

MIDI device.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 71 72

Comments to this Manuals

No comments

Yamaha YDP223 Manual Page 42

Comments to this Manuals

Related products and manuals for Synthesizer Yamaha YDP223