Yamaha PSR9000 Owner's Manual download pdf (Page 151)

MIDI Functions

● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Reference 151

System Settings

The explanations here apply to step #5 of the Basic Procedure on page 150.

■ Local Control

“Local Control” refers to the fact that, normally, the PSR-9000 keyboard controls the internal tone generator,

allowing the internal voices to be played directly from the keyboard. This condition is referred to as “Local Con-

trol on” since the internal tone generator is controlled locally by its own keyboard. Local control can be turned

off, however, so that the keyboard does not play the internal voices, but the appropriate MIDI information is still

transmitted via the MIDI OUT connector when notes are played on the keyboard. At the same time, the internal

tone generator can respond to MIDI information received on channels set to the “XG/GM” mode via the MIDI

IN connector. This means that while an external MIDI sequencer, for example, plays the PSR-9000 internal

voices, an external tone generator can be played from the PSR-9000 keyboard.

■ Clock, Receive Transpose and Thru Port

● Clock

Determines whether the PSR-9000 is controlled by its own internal clock or a MIDI clock signal received from an external

device. INTERNAL is the normal Clock setting when the PSR-9000 is being used alone. If you are using the PSR-9000

with an external sequencer, MIDI computer, or other MIDI device, and you want the PSR-9000 to be synchronized to the

external device, set this function to EXTERNAL. In the latter case, the external device must be connected to the PSR-9000

MIDI IN connector, and must be transmitting an appropriate MIDI clock signal.

● Transmit Clock

Turns MIDI clock transmission on or off.

When set to OFF, no MIDI clock or START/STOP data is transmitted.

● Receive Transpose

When the RECEIVE TRANSPOSE parameter is set to OFF, note data received by the PSR-9000 is not transposed, and

when set to ON, the received note data is transposed according to the current PSR-9000 song transpose setting.

● Thru See page 149.

■ Message Switch

The SYS/EX. TRANSMIT parameter turns MIDI transmission of MIDI system exclusive message data on or off.

The SYS/EX. RECEIVE parameter turns MIDI reception of MIDI exclusive data generated by external equip-

ment on or off. The CHORD SYS/EX. TRANSMIT parameter turns MIDI transmission of MIDI chord exclusive

data (chord detect — root and type) on or off. The CHORD SYS/EX. RECEIVE parameter turns MIDI reception

of MIDI chord exclusive data generated by external equipment on or off.

Transmit Settings

This display page allows you to specify which PSR-9000 voices and parts will be transmitted via which MIDI

channels (there are 32 MIDI channels), and to specify which types of data will be transmitted for each channel.

The explanations here apply to step #5 of the Basic Procedure on page 150.

The Tx MONITOR (transmit

monitor) indicates when data is

being transmitted on any of the

32 MIDI channels: The dots cor-

responding to each channel (1-

32) ﬂash brieﬂy whenever any

data is transmitted on the chan-

nel(s).

Turn transmission of the speciﬁed

data type on or off.

See the next page for details on

the data types.

Select a Part for the selected channel.

Select a

Channel.

149

• Channels 1 - 16 are handled

with the MIDI A terminals or

the TO HOST terminal; chan-

nels 1 - 16 of a second MIDI

port or device are handled as

channels 17 - 32 with the MIDI

B terminals.

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 213 214

Comments to this Manuals

No comments

Yamaha PSR9000 Owner's Manual Page 151

Comments to this Manuals

Related products and manuals for Synthesizer Yamaha PSR9000