Yamaha P-140 Owner's Manual download pdf (Page 48)

Connections

P-140 Owner’s Manual

ENGLISH

3 AUX PEDAL Jack

This jack is for connecting an optional FC4/FC5 foot switch or FC7 foot controller.

A wide range of functions such as the Soft Pedal function, etc. can be assigned to

this jack. Use the Function settings to assign the function. (page 43)

4 AUX OUT [R] [L] Pin jacks (LEVEL FIXED)

You can connect these jacks to a stereo system to amplify the P-140 or to a cassette

tape recorder to record your performance. Refer to the diagram below and use

audio cables to make the connections.

CAUTION

When the P-140’s AUX OUT jacks are connected to an external audio system, ﬁrst turn on the

power to the P-140, then to the external audio system. Reverse this order when you turn the

power off.

Depending upon the pedal that is

connected to the AUX PEDAL

jack, the effect produced by oper-

ating the pedal (ON/OFF, dynam-

ics, etc.) might be reversed. If this

happens, refer to the “AUX

PEDAL Type” section (page 43).

NOTE

FC5

Use audio cables and adaptor

plugs with zero resistance.

The P-140’s [MASTER VOLUME]

slider setting does not affect the

signal output from the AUX OUT

(LEVEL FIXED) jacks.

NOTE

When these are connected (with RCA pin plug; LEVEL FIXED), the sound

is output to the external device at a ﬁxed level, regardless of the [MASTER

VOLUME] slider setting.

P-140 Stereo

AUX OUT

RCA pin plug

AUX IN

RCA pin plug

audio cable

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 67 68

No comments

Yamaha P-140 Owner's Manual Page 48