Yamaha MOXF6 Manual download pdf (Page 71)

MIDI

Table 3: RPN Parameter List

3-2-5 Channel Mode message

3-2-6 Channel After Touch

Messages that let you control the sounds by the pressure you apply to the keys after the initial

striking of the keys, over the entire channel.

3-2-7 Polyphonic After Touch

Messages that let you control the sounds by the pressure you apply to the keys after the initial

striking of the keys, for each individual key.

RPN Parameter

Name

Data Entry

(Range)

Function

MSB LSB MSB LSB

000 000 Pitch Bend

Sensitivity

000 - 024 - Specifies the amount of pitch bend

produced in response to pitch bend

data in semitone increments.

000 001 Fine Tune -64 - +63 - Adjusts the tuning in cent increments.

000 002 Coarse Tune -24 - +24 - Adjusts the tuning in semitone

increments.

127 127 Null - - Voids the RPN and NRPN settings so

no tone generator settings are

changed when subsequent Data Entry

messages are received.

All Sounds Off

(Control #120)

Clears all sounds currently sounding on the specified channel.

However, the status of channel messages such as Note On and Hold On

is maintained.

Reset All Controllers

(Control #121)

Resets all controllers to their initial values.

However, some controllers are not affected.

All Notes Off (Control

#123)

Clears all notes currently on for the specified channel.

However, if Hold1 or Sostenuto is on, notes will continue sounding until

these are turned off.

Omni Mode Off

(Control #124)

Performs the same operation as when an All Notes Off message is

received.

The receive channel is set to 1.

Omni Mode On

(Control #125)

Performs the same operation as when an All Notes Off message is

received.

Only the receive channel is set to Omni On.

Mono (Control #126) Performs the same operation as when an All Sound Off message is

received.

If the 3

byte parameter (the parameter that determines the mono number)

is 0 - 16, the parts corresponding to those channels are set to Mono.

Poly (Control #127) Performs the same function as when an All Sounds Off message is

received.

Sets the corresponding channel to Poly Mode.

1 2 ... 66 67 68 69 70 71 72 73 74

Comments to this Manuals

No comments

Yamaha MOXF6 Manual Page 71

Comments to this Manuals

Related products and manuals for Synthesizer Yamaha MOXF6