Yamaha MOX6 Owner's Manual download pdf (Page 35)

Menu: [File] menu

MOX6/MOX8 Editor Owner’s Manual

Setup

Determines the basic setup of the MOX6/MOX8 Editor. After setting necessary parameters, click [OK] to

actually apply the settings to the MOX6/MOX8 Editor.

1 [X] (Close) button

Click this to close this window without applying the settings. This button is the same as the [Cancel]

button (#).

2 [Detail] button

You can make detailed settings for the Input Port and Output Port by setting this button to “On.” This

setting is necessary if the Port name is changed on a computer.

3 MIDI

Set the MIDI Port for communication between the MOX6/MOX8 Editor and the MOX6/MOX8 instrument.

When the [Detail] button (2) is set to “Off,” select a value such as “Yamaha USB 0” or “MOX6/MOX8” at

the top left column. When the [Detail] button (2) is set to “On,” select Port 4 for the MIDI In setting, then

select Port 1 and Port 4 for the MIDI Out settings.

n When “!” is shown at left of the Port name (e.g., “! Yamaha USB IN 0”), this indicates that the previously used

Port cannot be found or some Ports are not set properly. Check the MIDI Port settings in the host application.

n Keep in mind that setup on the host application is necessary before making settings here.

n Make sure to set the MIDI IN/OUT parameter to “USB” in the MIDI display of the Utility mode on the MOX6/

MOX8 instrument.

4 Device No.

Set the Device number to the same as the value specified in the MIDI display of the Utility mode on the

MOX6/MOX8 itself. When the Device number on the MOX6/MOX8 is set to “All,” set the Device No. here

to “1.”

9 !

)

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 47 48

No comments

Yamaha MOX6 Owner's Manual Page 35