Yamaha DGX-205 Owner's Manual Page 10

  • Download
  • Add to my manuals
  • Print
  • Page
    / 94
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 9
10
DGX-205/203, PSR-295/293 Owner’s Manual
Setting Up
Be sure to do the following operations BEFORE turning on the power.
Although the instrument will run either from an optional AC adaptor or batteries, Yamaha recommends use of an AC
adaptor whenever possible. An AC adaptor is more environmentally friendly than batteries and does not deplete
resources.
Using an AC Power Adaptor
Make sure that the [STANDBY/ON] switch of the
instrument is set to STANDBY.
Connect the AC adaptor (PA-5D, PA-3C or other
adaptor specifically recommended by Yamaha) to the
power supply jack.
Plug the AC adaptor into an AC outlet.
Using Batteries
Open the battery compartment cover located on the
instrument’s bottom panel.
Insert the six new batteries, being careful to follow
the polarity markings on the inside of the compart-
ment.
Replace the compartment cover, making sure that it
locks firmly in place.
For battery operation the instrument requires six 1.5V
“D” size, R20P (LR20) or equivalent batteries. (Alkaline
batteries are recommended.) When battery power
becomes too low for proper operation, the battery
exchange indication flashes in the display. As soon as
this message appears, make sure to replace all batter-
ies, following the precautions listed below.
If necessary, also make sure to save all important User
data (see page 42), since custom panel settings are
lost when the batteries are removed.
Power Requirements
Use ONLY a Yamaha PA-5D or PA-3C AC Power Adaptor (or
other adaptor specifically recommended by Yamaha) to power
your instrument from the AC mains. The use of other adaptors
may result in irreparable damage to both the adaptor and the
instrument.
WARNING
Unplug the AC Power Adaptor when not using the instrument,
or during electrical storms.
CAUTION
PA-5D or
PA-3C
AC outlet
Connecting the AC power adaptor automatically supplies power from
the adaptor and overrides battery power, even when batteries are
installed.
NOTE
Use only manganese or alkaline batteries for this instrument.
Other types of batteries (including rechargeable batteries) may
have sudden drops of power when battery power becomes low,
possibly resulting in loss of data in the flash memory.
Make sure to install the batteries in the same direction, maintain-
ing the correct polarity (as shown). Incorrect battery installation
may result in heat, fire and/or leaking of corrosive chemicals.
When the batteries run down, replace them with a complete set of
six new batteries. NEVER mix old and new batteries. Do not use
different kinds of batteries (e.g. alkaline and manganese) at the
same time.
If the instrument is not to be in use for a long time, remove the bat-
teries from it, in order to prevent possible fluid leakage from the
battery.
Please use the power adaptor when transferring data to flash
memory. Batteries (including rechargeable types) can be drained
rapidly by this type of operation. If the batteries do become
drained during a data transfer, both the data being transferred and
the data currently in the transfer destination will be lost.
CAUTION
Page view 9
1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 93 94

Comments to this Manuals

No comments