Yamaha SC2 Owner's Manual download pdf (Page 39)

English

SC2 Owner’s Manual

 Version

The firmware version of this unit is read out in English.

 Audio Loop Back

Determines whether audio sound input from the connected computer or smart device (via the USB Audio

Interface function or wireless connection; page 31) is output to a computer or a smart device or not, along with

the performance played on the instrument. To output the audio input sound, set Audio Loop Back to “On.”

For example, if you want to record the audio input sound as well as the sound played on the instrument to a

computer or smart device, set this to “On.” If you intend to record only the sound played on the instrument to

a computer or smart device, set this to “Off.”

Default setting: On

NOTICE

If you are using a DAW (digital audio workstation) application with this instrument, set the Audio Loop Back function

to off. Otherwise, a loud sound may occur, depending on the settings of the computer or the application software.

NOTE

• The playback sound of an Audio Song on this instrument is also output to a computer or smart device when this is set to

“On,” while the sound is not output when this is set to “Off.”

• With Audio Recording on this instrument, the audio input sound from the connected computer or smart device is recorded

when this is set to “On,” while the sound is not recorded when this is set to “Off.”

B0: Read out the firmware version.

Lowest key (A-1)

A#0: On

A0: Off

Lowest key (A-1)

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 45 46 47

No comments

Yamaha SC2 Owner's Manual Page 39