Yamaha YHT-S300 Quick Start Guide download pdf (Page 18)

6 En

PLAYBACK

Once you have finished all cable connections and remote control operation, follow the procedure below to start basic

playback operation.

1 Press .

This system is turned on and the STATUS indicator

lights green.

This system has the auto-sleep function, which will

automatically switch the system to turn off if the system is

left turned on for 24 hours without any operation being

performed.

2 Press one of the input buttons to select an

input source.

3 Start playback on the selected external

component.

For information on the external component, refer to

the instruction manual for the product.

4 Press VOLUME +/– to adjust the volume

level.

To turn off the volume temporarily, press MUTE. While the

mute function is activated, the VOLUME indicator flashes.

To resume the volume, press MUTE again or press

VOLUME +/–.

When sound of HDMI is output from the TV, the volume

level does not change if you press VOLUME +/–.

■ Using the remote control

Basic playback operation

Note

Press again to set the system to standby

mode.

When the “HDMI CONTROL” is set to “ON”, the

STATUS indicator lights red. When the “HDMI

CONTROL” is set to “OFF”, the STATUS indicator

turns off.

Within 6 m

Use t

e remote contro

m o

subwoofer integrated receiver and point it toward

the remote control sensor.

• Be careful not to spill liquid on the remote control.

• Be careful not to drop the remote control.

• Do not leave the remote control in a place that is:

– hot or humid, such as near a heater or in a bathroom

– extremely cold

–dusty

Notes

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments

Yamaha YHT-S300 Quick Start Guide Page 18

Comments to this Manuals