3 En
The following is the recommended procedure for
installing the speaker in a ceiling. Please read it
carefully before installation.
• Before you begin installation, read this owner's
manual completely and consult your local building
codes. If you have any doubt, contact your dealer or a
qualified audio/video installer.
• Before installing the speaker, run the speaker cables
to the installation location.
CAUTION
• When installing the speaker, do not touch the woofer
or tweeter units with your hands or expose them to
excessive physical shock. If they are dented or bent,
the sound will be distorted.
• Be aware of any concealed studs, electrical wiring or
plumbing in the ceiling into which you are installing
the speaker. If you are not sure of a safe way to install
this speaker, consult a professional installer or a
building contractor.
• When installing your NS-ICS600 in-ceiling speaker,
be aware of the product weight (See specification
page) and the sturdiness of the material into which
you are installing the speaker.
• Placing the speaker too close to a CRT-type TV may
impair the picture color or cause a buzzing noise. In
this case, move the speaker away from the TV. This is
not an issue with LCD and plasma TVs.
NOTE
• If you wish to paint the speaker grille, refer to page 6
“PAINTING THE SPEAKER GRILLE” before proceeding.
Ceiling board thickness and clearance
space above ceiling
• Check to ensure that the area you are installing the
speaker is free of any ceiling joints or studs by
tapping the ceiling or using a stud finder.
• Make sure that there is sufficient space on the ceiling
for installation and that there are no obstructions
such as ducts, pipes, etc. See the following chart for
external product dimensions and ceiling installation
measurements.
• The thickness required for the ceiling boards is 5 – 30
mm (1/4” – 1-1/8”).
* The size differs depending on the model. Refer to the above
chart.
PREPARATION
INSTALLATION
NS-ICS600 Speaker u1
Unpacking
After unpacking, check that the following items are
contained.
Tools needed for installation
When installing the speaker to the ceiling, you will
need to prepare the following tools.
* Use an appropriate tool for the material of the mounting
surface.
Drill
Philips
screwdriver
Pencil
Safety gogglesWire strippers Keyhole saw
GlovesSturdy wire
(such as a coat hanger)
Speaker grille u1
Cutout template u1
Before installation
NS-ICS600
Diameter A I 231 mm (9-1/8”)
Depth B 113.5 mm (4-1/2”)
Depth C 109 mm (4-1/4”)
Diameter D I 204 mm (8”)
AB
C
D
'0A;#/#*#AURGCMGTHOࡍࠫ㧞㧜㧝㧜ᐕ㧤㧢ᣣޓ㊄ᦐᣣޓඦ೨㧤ᤨ㧠ಽ
(28 pages)
(17 pages)
(2 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals