Yamaha mLAN Patchbay Owner's Manual download pdf (Page 23)

■ Cancel

Cancels the settings and closes the window.

■ Setup

If the node represents a computer, clicking the [Setup] button displays the mLAN Driver Setup

window (refer to “Changing settings after installation” in the installation Guide).

If the node represents an mLAN device, clicking the [Setup] button displays the mLAN Control

Panel window (refer to “Setting up from the mLAN Auto Connector” in the Installation Guide).

If you cannot change the sampling frequency or the number of output

channels:

To c hange the computer’s sampling frequency or the number of output channels, you must ﬁrst shut

down the DAW or audio sequencer that is using the mLAN driver.

1. Shut down the DAW or audio sequencer.

2. If you were using mLAN Graphic Patchbay as a plug-in for the host application,

restart mLAN Graphic Patchbay as a stand-alone application (page 6).

3. In the Node Information window, edit the sampling frequency and/or the

number of output channels as necessary (page 19).

4. Restart the DAW or audio sequencer.

About the Maximum Number of Connected Nodes

The Maximum Number of Connected Nodes ﬁeld in the Node Information (Audio) window

indicates the maximum number of audio nodes that can be connected to the audio input of the

corresponding node.

The Maximum Number of Connected Nodes ﬁeld in the Node Information (MIDI) window

indicates the maximum number of MIDI nodes that can be connected to the MIDI input of the

corresponding node.

For example, assume that the maximum numbers of connected nodes are as follows:

•The maximum number of connected nodes indicated in the Node Information (Audio)

window: four units

•The maximum number of connected nodes indicated in the Node information (MIDI)

window: two S400s and one S200

In this case, you can connect up to four S400s and S200s combined as Audio nodes to the computer

node.

You can connect up to two S400s and one S200 as MIDI nodes.

On a computer, you can connect only one S200 to a computer node.

NOTE

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 42 43

No comments

Yamaha mLAN Patchbay Owner's Manual Page 23