Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring in direction (a). To
decrease the spring preload and the-
reby soften the suspension, turn the
adjusting ring in direction (b).
Align the appropriate notch in the
adjusting ring with the position indica-
tor on the shock absorber.
EWA10221
s WARNING
This shock absorber assembly
contains highly pressurized nitro-
gen gas. Read and understand the
following information before hand-
ling the shock absorber assembly.
G Do not tamper with or attempt
to open the cylinder assembly.
G Do not subject the shock
absorber assembly to an open
flame or other high heat sour-
ce. This may cause the unit to
explode due to excessive gas
pressure.
G Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
G Do not dispose of a damaged
or worn-out shock absorber
assembly yourself. Take the
shock absorber assembly to a
Yamaha dealer for any service.
EAUT1072
Luggage hook
EWAT1031
s WARNING
G Do not exceed the load limit of
1.5 kg (3.3 lb) for the luggage
hook.
G Do not exceed the maximum
load of CS50/CS50M 169 kg
(373 lb) CS50Z 166 (366 lb) for
the vehicle.
1. Luggage hook
Spring preload setting:
Minimum (soft):
(b)
Standard:
middle
Maximum (hard):
(a)
INSTRUMENT AND CONTROL FUNCTIONS
3-13
3
49D-F819D-E0:49D-F819D-E0.QXD 18/12/08 19:40 Página 30
Comments to this Manuals