Yamaha DKC-850 Manual download pdf (Page 11)

Other Settings

English 11

Press [+/YES] and [–/NO] to change the brightness.

The following brightness settings are available: 40%, 60%, 80%,

100%.

Note:

The brightness of the display will

return to its original setting when you

press any buttons, insert media, or

eject media.

To set the time for the display to dim, press [ ] to move

the cursor to the dim light parameter, then press [+/YES]

and [–/NO].

The following time settings are available: OFF, 1min, 2min, 3min,

5min, 10min, 15min, 30min, 45min, 60min.

If there is no operation for the time set above, the display dims to

half the brightness of its original setting.

Press [ENTER] to complete the operation.

Note:

These settings are not required for

the use of the remote control of this

unit. In case of using an external

remote controller, refer to the user’s

guide for that remote controller.

You can enter the 4-digit passcode to prevent unauthorized access from

the commercially available external remote controller, or you can also set

the MAC address of the external remote controller to allow it to access your

Disklavier without entering the passcode.

Note:

If changes are inappropriately made

for these settings, the external remote

controller may not function properly.

In such cases, enter “####” to reset

the passcode setting.

*Brightness=80%

*Dim light=OFF

=Display= ?=-+ENT

Continued on next page

*Brightness=100%

*Dim light=1min.

=Display= ?=-+ENT

Setting the Passcode to Prevent Unauthorized Access

[SETUP] “Passcode”

1 2 ... 6 7 8 9 10 11 12 13

Comments to this Manuals

No comments

Yamaha DKC-850 Manual Page 11

Comments to this Manuals

Related products and manuals for Remote controls Yamaha DKC-850