Yamaha MDX-9 Owner's Manual download pdf (Page 25)

COPY PROTECTION (SCMS)

As a digital audio component, this MD recorder

conforms with the Serial Copy Management System

(SCMS) standards. The Serial Copy Management

System restricts copies made by recording digital signals

to first-generation copies only. Therefore, an MD

recorded through a digital input cannot be used as a

source for making another digital recording.

Can’t Copy

Digital recording cannot be performed. (See “COPY

PROTECTION (SCMS)” on this page.)

Can’t Edit

Edit operations are not possible.

Can’t Play

Timer playback is not possible. The loaded disc may be

blank, damaged, or an incompatible format.

Can’t REC

• Timer recording is not possible. The loaded disc may

be protected or there may not be enough blank space

remaining on the disc.

• Recording is not possible because there is not enough

blank space remaining on the disc.

DIGin Unlock

No digital signal is being input to the selected digital input jack.

TMP Over!!

The temperature of the unit has exceeded the normal

operating temperature. Turn off the unit and let it cool

down. If the unit is installed in a place with little

ventilation (such as a built in bookcase), move the unit

to another location with better ventilation.

Disc Full

Recording is not possible because there is no blank

space remaining on the disc.

Title Full

Additional characters cannot be input for the current

title because the maximum number of characters for a

single title (250) has already been input.

UTOC W Error

Error occurred when writing to the UTOC.

Not Audio

The inserted disc is not an audio MD.

Tr Protected

The selected track cannot be edited because it is protected.

TOC Full

The disc area allotted for TOC data has become full and

further editing is not possible.

UTOC ERR ...

Problem involving UTOC data.

TOC Writing

The TOC data is being written to the disc. Do not move

the unit or pull out the mains lead. If you do, recorded

material may not be saved normally.

TOC Reading

The unit is reading the TOC data.

Protected

The record protection on the inserted MD is set to “protect”.

Playback MD

The inserted MD is a designed for playback only (you

cannot record on this disc).

DISPLAY MESSAGES

MONITOR OUT

The monitor out function is active. The audio signal

input to the selected input terminals is output from this

unit’s output terminals.

Fade in

The fade-in function is being performed. Recording is

started with a gradual increase in volume reaching the

recording level in about 10 seconds.

Fade out

The fade-out function is being performed. The unit is

put in the record pause mode after a gradual fade-out to

a minimum volume in about 10 seconds.

Care of MDs

• Do not expose the MD to direct sunlight or heat

sources such as hot air ducts, nor leave it in a car

parked in direct sunlight as there can be a

considerable rise in temperature inside the car.

• Periodically remove dust and debris from the cartridge

surface by wiping it with a dry cloth.

• Because the MD itself is housed in a cartridge, you

can handle it normally without being concerned about

dirt or fingerprints. However, malfunctioning may

result if the cartridge itself is dirty or warped.

Do not open the shutter on the MD cartridge

Trying to force the shutter open will damage the shutter.

1 2 ... 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Yamaha MDX-9 Owner's Manual Page 25

Comments to this Manuals

Related products and manuals for Recording Equipment Yamaha MDX-9