Yamaha RXV2092 User Manual download pdf (Page 35)

English

CONNECTING THE MAIN SPEAKERS TO THIS UNIT

One or two sets of MAIN speakers can be connected to this

unit.

If you use two sets of MAIN speakers, connect one set to the

MAIN SPEAKERS A terminals, and connect another set to the B

terminals. If you use only one set of MAIN speakers, connect them

to either the MAIN SPEAKERS A or B terminals. Make sure that

the jumper bars between the PRE OUT and MAIN IN jacks on the

rear panel are in place.

It is also possible to use an external power amplifier if more

power is desired. In this case, remove the jumper bars and connect

the PRE OUT jacks to the INPUT jacks of a stereo power amplifier

with a stereo pin cable—making sure to connect the left and right

channels correctly. Connect the MAIN speakers to the speaker

output terminals of the power amplifier.

Set the SPEAKERS switch A or B (or both A and B) on the

front panel corresponding to the main speakers you will use to the

ON position. Set the switch for the main speakers you will not use

to the OFF position. Selected main speakers are shown by the

lighting of “SPEAKERS A” and/or “SPEAKERS B” on the display

panel.

PRE OUT

INPUT

Main speaker A Main speaker A

Main speaker B Main speaker B

Power amplifier

This unit

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 87 88

No comments

Yamaha RXV2092 User Manual Page 35