Yamaha HTR-5835 User Manual download pdf (Page 60)

SET MENU

Speaker distance C)SP DISTANCE

Use this feature to mamially input the distance of each

speaker and adjust the delay applied to respective channel.

Ideally, each speaker should be the same distance from the

main listening position. However, this is not possible in

most home situations. Thus, a certain amount of delay

must be applied to the sound from each speaker so that all

sound will arrive at the listening position at the same time.

Unit UNIT

Choices: meters (m), feet (ft)

Initial setting;

U.S.A. and Canada models: feet (ft)

Other models: meters (m)

Select meters to input speaker distances in meters.

Select feet to input speaker distances in feet.

Speaker distances

Choices: 0.3 to 24.0 m (1 to 80 ft)

FRONT L adjusts the distance of the front left speaker.

Initial setting: 3.0 m (10.0 ft)

FRONT R adjusts the distance of the front right

speaker. Initial setting: 3.0 m (10.0 ft)

CENTER ad justs the distance of the center speaker.

Initial setting: 3.0 m (10.0 ft)

SUR.L adjusts the distance of the surround left

speaker. Initial setting: 3.0 m (10.0 ft)

SUR.R adjusts the distance of the surround right

speaker Initial setting; 3.0 m (10.0 ft)

SWFR adjusts the distance of the subwoofer. Initial

setting: 3.0 m (10.0 ft)

■ Center graphic equalizer D)CENTER GEQ

Use this feature to adjust the built-in 5-band graphic

equalizer for the center channel so that the tonal quality of

the center speaker matches that of the front speakers. You

can make adjustments listening to the currently selected

source component or a test tone.

You can adjust 5 frequency bands:

lOOHz, 300Hz, IkHz, 3kHz, lOkHz

Choices; -6 to +6 dB

Initial setting: 0 dB

• Select ON to output test tones from the front left and

center speakers, and adjust the tonal quality of the

center speaker.

• Select OFF to stop the test tone and output the

currently selected source component.

■ Low-frequency effect level E)LFE LEVEL

Use to adjust the output level of the LFE (low-frequency

effect) channel according to the capacity of your

subwoofer or headphones. The LFE channel carries low-

frequency special effects which are only added to certain

scenes. This setting is effective only when this unit

decodes Dolby Digital or DTS signals.

Choices: -20 to 0 dB

Speaker SP LFE

Select to adjust the speaker LFE level.

Headphone HP LFE

Select to adjust the headphone LFE level.

Note

Depending on the “LFE LEVEL” setting, some signals may not

be output from the SUB WOOFER OUTPUT jack.

■ Dynamic range F)D. RANGE

Use to selec t the amount of dynamic range compression to

be applied to your speakers or headphones. This setting is

effective only when the unit is decoding Dolby Digital and

DTS signals.

Choices: MIN (minimum), STD (standard), MAX

(maximum)

Speaker SP D.R

Select to adjust the speaker compression.

Headphone HP D.R

Select to adjust the headphone compression.

• Select MIN for listening to sources at low volume

levels.

• Select STD for general use.

• Select MAX for feature films.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 80 81

Comments to this Manuals

No comments

Yamaha HTR-5835 User Manual Page 60

Comments to this Manuals

Related products and manuals for Receivers and Amplifiers Yamaha HTR-5835