Yamaha RX-V2300 Owner's Manual Page 76
- Page / 91
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
72
ZONE 2
■ Special considerations when
using DTS software
The DTS signal is a digital bitstream. Therefore, if you
attempt to send the DTS signal to the second room, you
will only be able to hear the digital noise sound that could
damage your speakers.
Due to this characteristic of DTS encoded discs, the
following considerations and adjustments need to be
made.
For LDs or DVDs encoded with DTS
Only 2-channel analog audio signals may be sent to the
second room, as follows:
• LDs
Set your LD player’s left and right outputs to the
analog soundtrack.
• DVDs
Use the disc menu to set the DVD player’s mixed 2-
channel left and right audio outputs to the PCM or
Dolby Digital soundtrack.
For CDs encoded with DTS
DO NOT USE the Zone 2 feature for CDs encoded with
DTS to avoid unexpected noise.
Remote Control in Zone 2
In the second room (Zone 2), the supplied remote control
can be used for the Zone 2 remote control. You can select
the input source and control the component which is
located in the main room directly from the second room
regardless of the listening condition in the main room.
Before starting the following procedure, set REC OUT/
ZONE 2 on the front panel to SOURCE/REMOTE.
1 Repeat steps 1 and 2 of the procedure in
“Setting the Manufacturer Code” on page 44.
2 Press l / h to select “L:AMP”.
3 Press k / n to select “Zone2”.
4 Press LEARN to complete the Zone 2 setup.
5 Press SOURCE SELECT k to display
“Zone2” in the display window.
6 Press an input selector button to select the
input source you want to listen to in the
second room.
The display window shows “2: name of selected
input” if the remote control is in the Zone 2 mode.
7 You can control the component by using the
component control area buttons.
Note
• Adjust the Zone 2 volume with the control on the amplifier in
the second room.
8 Press SOURCE SELECT k / n to exit from
the Zone 2 mode.
ENTER
ENTER
LEARN
SELECT
SOURCE
SELECT
SOURCE
6CH INPUT
SOUND
TITLE
MENU
CHAPTER
PAUSESTOPPOWER
REC
HALL 1
EX/ES
DSP
10KEY
ROCK
CONCERT
MOVIE
THEATER 1
MOVIE
THEATER 2
MUTE
VOLUME
STEREO
TV INPUT
TV VOL
CH
PRESET
DISC
EFFECT
TV MUTE
MUSIC
VIDEO
TV
THEATER
ENTER-
TAINMENT
HALL 2
CHURCH
JAZZ CLUB
SELECT
/DTS
SUR.
CHP/INDEX
A/B/C/D/E
SELECT
DISPLAY
SEARCH
SOURCE
PLAY
– +
ENTER
1
5
9
6
10
0
10
100
11 12
78
234
+
+
PHONO
CD
DVD
VCR2/DVR
VCR 1
D-TV/LD
CBL/SAT
CD-R
MD/TAPE
TUNER
V-A UX
0110V2300_71-72_EN(U) 02.8.9, 10:38 AM72
- RX-V2300 1
- IMPORTANT SAFETY INSTRUCTIONS 2
- CAUTION II 3
- III CAUTION 4
- CONTENTS 5
- FEATURES 6
- GETTING STARTED 7
- CONTROLS AND FUNCTIONS 8
- Remote Control 10
- Using the Remote Control 11
- Front Panel Display 12
- Rear Panel 13
- SPEAKER SETUP 14
- Connecting the Speakers 15
- ■ SUBWOOFER jack 16
- ■ IMPEDANCE SELECTOR switch 17
- CONNECTIONS 18
- Connecting Audio Components 21
- Connecting the Antennas 23
- Connecting to an External 24
- Amplifier 24
- Connecting to the 6CH INPUT 24
- ■ AC OUTLET(S) (SWITCHED) 25
- ■ VOLTAGE SELECTOR 25
- Turning on the Power 26
- ON-SCREEN DISPLAY (OSD) 27
- SPEAKER MODE SETTINGS 28
- Before You Begin 29
- 4 Press –/+ repeatedly to 30
- 5 When the adjustment is 30
- BASIC PLAYBACK 31
- Input Modes and Indications 33
- 1 Set 10KEY/DSP to DSP on 34
- Selecting PRO LOGIC 35
- PRO LOGIC or Neo: 6 35
- Front panel 36
- Remote control 36
- Understanding Sound Fields 37
- Hi-Fi DSP Programs 37
- CINEMA-DSP 37
- Sound Field Effect 38
- Straight Decode 38
- Features of DSP Programs 39
- Automatic and Manual Tuning 42
- (for FM stations) 43
- C :AM 630 kHz 44
- C3:AM 630 kHz 44
- 2,41,31,3 45
- BASIC RECORDING 46
- REMOTE CONTROL FEATURES 47
- Setting the Manufacturer Code 48
- Learn Feature 49
- Display Window 50
- Using the Macro Feature 51
- ■ Operating the macro 52
- ■ Programming a macro 52
- Clearing Learned Functions 53
- Macros, Renamed Source Names 53
- Clearing a Learned Function 54
- Each Component Control Area 56
- SAT area) 57
- SET MENU 61
- 1 SPEAKER SET (speaker mode 62
- 1C REAR L/R SP 63
- ■ 1D REAR CT SP (rear center 64
- ■ 1E LFE/BASS OUT (bass out 64
- 2 LOW FRQ TEST 65
- ■ About the test tone 66
- 6 INPUT RENAME 67
- 7 I/O ASSIGNMENT 67
- 8 INPUT MODE (initial input 68
- 11 D-RANGE (dynamic range) 69
- 9 PARAM. INI (parameter 69
- 10 LFE LEVEL 69
- 12 SP DELAY 70
- 14 MEMORY GUARD 71
- -/+ : Select 71
- / : Exit 71
- CENTER MAIN 72
- 15A CENTER to 72
- 1 Set PARAMETER/SET 73
- SLEEP TIMER 74
- Zone 2 Connections 75
- Remote Control in Zone 2 76
- What Is a Sound Field? 77
- Resetting a Parameter to the 78
- Factory-set Value 78
- Changing Parameter Settings 78
- 60 dB 60 dB 60 dB 81
- TROUBLESHOOTING 83
- ■ Remote control 87
- GLOSSARY 88
- SPECIFICATIONS 90
Related products and manuals for Receiver Yamaha RX-V2300
Receiver Yamaha RX-A2000 User Manual
(9 pages)
(9 pages)
Receiver Yamaha RX-V371BL User Manual
(8 pages)
(8 pages)
Receiver Yamaha RX-V540 User Manual
(10 pages)
(10 pages)
Receiver Yamaha HTR-3065 Setup Guide
(8 pages)
(8 pages)
Receiver Yamaha R-95 Owner's Manual
(19 pages)
(19 pages)
Receiver Yamaha T-700 Owner's Manual
(12 pages)
(12 pages)
Receiver Yamaha TX-340 Owner's Manual
(16 pages)
(16 pages)
Receiver Yamaha RX-V1300 User Manual
(84 pages)
Receiver Yamaha RX RX-Z7 User Manual
(8 pages)
(8 pages)
Receiver Yamaha RX-395RDS Owner's Manual
(42 pages)
(42 pages)
Receiver Yamaha R-300 User Manual
(90 pages)
(90 pages)
Receiver Yamaha HTR-3066 Setup Guide
(8 pages)
(8 pages)
Receiver Yamaha AW2816 Owner's Manual
(420 pages)
(420 pages)
Receiver Yamaha HTR-5140 Owner's Manual
(66 pages)
(66 pages)
Receiver Yamaha RX-V596RDS Owner's Manual
(70 pages)
(70 pages)
Receiver Yamaha RXV559 - AV Receiver User Manual
(118 pages)
Receiver Yamaha HTR-6230 Service Manual
(99 pages)
(99 pages)
Receiver Yamaha RX-A1030 User Manual
(2 pages)
(2 pages)
© 2020, manymanuals.com. All rights reserved. | 1.772 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals