When using the remote controller, the selector dial must be
set at “AMP/TUN”.
1
Set to the “
∞
” position.
2 Select main speakers A or B.
Front panel
* Both speakers A and B can be selected.
3 Turn on the power.
4 Select an input source.
(For video sources, turn on the TV/monitor.)
The selected source is shown on the display panel and
the monitor screen.
Name of the selected input source
To select the tape deck connected to this unit’s
TAPE/MD terminals or the source connected to this
unit’s EXTERNAL DECODER INPUT terminals, use one
of the buttons figured below. (Refer to page 35 for
details.)
Comments to this Manuals