Yamaha PMT-L11/H15 Owner's Manual download pdf (Page 15)

E-15

English

Français

Deutsch

Svenska

Italiano

Español

Nederlands

2 Adjust the vertical angle.

Adjust the projector so that the projected image is centered vertically on the screen, and then tighten the

four vertical angle adjustment screws.

3 Adjust the tilt angle.

Adjust the projector so that the projected image is not tilted at all compared to the screen, and then tighten

the four tilt angle adjustment screws.

15˚

Maximum angle of

adjustment: ±15˚

(PMT-L11)

Vertical angle adjustment screws

(There are also screws located on the opposite side.)

10˚ 10˚

Maximum angle of adjustment: ±10˚

(PMT-L11)

Tilt angle adjustment screws

(There are also screws located on the opposite side.)

If the projector still needs further adjustment, start over from step 1.

After adjustment is completed, make sure that the projector is secured in place.

Top

Bottom

12PMT_BODY_E 5/29/1, 9:16 AM15

1 2 ... 10 11 12 13 14 15 16

No comments

Yamaha PMT-L11/H15 Owner's Manual Page 15