Yamaha MFC1 Specifications Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 30
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
5. PLAYBACK
To play back the recorded material, press the
PARAMETER key to enter the playback standby
mode. The LCD will display the “PLAY” message.
To actually play the recording, press the
PARAMETER INCREMENT/DECREMENT key. The
recorded material will be played each time the
PARAMETER INCREMENT/DECREMENT key is
pressed.
To program a specific segment of the recording to be
played back in the FREEZE A program, set the START
and END parameters to appropriate values
(0~2000.0). The example below depicts how the
START and END parameters affect output.
Another way to trigger playback is to use the Input Trig-
ger Parameter. Select the input Trigger Parameter and
press the parameter Increment key to enter the stand-
by mode. Playback will be automatically triggered when
the input signal exceeds nominal level.
The FREEZE B program PITCH and FINE parameters
function identically to those in the PITCH CHANGE pro-
gram to change the pitch of the playback signal.
Playback start and stop can be triggered by the
PARAMETER INCREMENT/DECREMENT keys, foot
switch or via a MIDI keyboard connected to the MIDI
IN connector. With the FREEZE B program, playing a
key on the MIDI keyboard produces the corresponding
pitch change in the playback output, and triggers
playback.
6. TRIGGER MASK (FREEZE A). Range: 0 ~ 2000.0 ms.
This parameter makes it possible to disable playback
re-triggering for a specified time (0 ~ 2,000 msec).
For example, if you wish to prevent re-triggering for
the duration of the entire sample or a portion of the
sample, set the TRIGGER MASK parameter for the
appropriate length of time. Once playback has
been triggered, it can only be triggered again
after the set TRIGGER MASK time has elapsed.
Playback can also be triggered by a footswitch con-
nected to the front-panel MEMORY/FOOT TRIGGER
jack when the FOOT TRIGGER key is pressed and its
LED is ON. A MIDI keyboard connected to the MIDI IN
terminal can also be used to trigger playback — simply
play a note on the keyboard.
16
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 29 30

Comments to this Manuals

No comments