Yamaha MFC1 Specifications download pdf (Page 12)

This effect, commonly used in contemporary record-

ings, produces independently variable left-and right-

channel signal delays. The result is an intriguing “doubl-

ed” sound.

1. LEFT CHANNEL DELAY TIME. Range: 0.1 ~ 2000.0

msec

Permits highly accurate setting of the left channel

delay following the direct sound.

2. LEFT CHANNEL FEEDBACK GAIN. Range:

- 99% ~ + 99%

Sets the amount of delay signal fed back to the in-

put circuitry. The higher the feedback gain setting

the greater the number of delay repeats produced.

A negative value setting produces out of phase

feedback.

3. RIGHT CHANNEL DELAY TIME. Range: 0.1~

2000.0 msec

Sets the delay time of the right channel.

4. RIGHT CHANNEL FEEDBACK GAIN. Range: - 99%

~+99%

Permits setting the feedback gain setting of the right

channel delay.

4. RIGHT CHANNEL FEEDBACK GAIN. Range: - 99%

~+99%

5. HIGH (FEEDBACK HIGH). Range: 0.1 ~ 1.0

Controls feedback of the high-frequency range. The

high frequency feedback is reduced as the value of

this parameter is reduced.

Similar to Delay, Echo brings added dimension and force

to both instrumental and vocal music. While Reverbera-

tion recreates an abundance of partial sound reflec-

tions, and Delay produces a limited number of signal

repetitions, Echo can produce limitless signal

repetitions.

1. LEFT CHANNEL DELAY TIME. Range: 0.1 ~ 1000.0

msec

After this delay time has elapsed, the first echo will

appear. Subsequent echoes will appear at the same

time interval, the number of echoes depending on

how the Feedback Gain parameter is set.

2. LEFT CHANNEL FEEDBACK GAIN. Range: -99%

~ + 99%

This parameter permits adjustment of the number

of echoes that follow the direct signal, from zero to

a virtually infinite repeat at the maximum setting.

The overall decay time of the effect is proportionate

to the Feedback Gain setting.

3. RIGHT CHANNEL DELAY TIME. Range: 0.1~

1000.0 msec

Parameter 3 and 4 have the same function as those

of 1 and 2 but the signal will be produced from the

Right output.

5. HIGH (FEEDBACK HIGH). Range: 0.1 ~ 1.0

Determines the portion of high frequency feedback.

The lower the value, the less high frequency is

produced.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Comments to this Manuals

No comments

Yamaha MFC1 Specifications Page 12

Comments to this Manuals

Related products and manuals for Processors Yamaha MFC1