Yamaha CRW8424SX Series User Manual download pdf (Page 30)

Operation

This section explains how to operate the CRW8424SX drive after you have

installed it.

Loading a Disc

1 Press the Eject button on the CRW8424SX drive’s front panel.

2 Place the disc onto the tray with its label or printing facing upward.

3 Press the Eject button to close the tray.

n When a disc is loaded, the ON/DISC LED is lit up in orange first, then changes to green. For

more details, refer to page 30.

n Do not push or pull the tray using excessive force. Doing so can damage the drive or the disc.

Instead, always use the Eject button to open or close the tray.

Ejecting the Disc

1 Press the Eject button on the CRW8424SX drive’s front panel.

2 Remove the disc from the tray.

3 Press the Eject button to close the tray.

n It may not be possible to eject the disc tray while a disc is being read or in other situations,

depending on the SCSI command.

n Only remove the disc after the disc tray has opened fully. Otherwise, you risk damaging the

drive or the disc.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 42 43

No comments

Yamaha CRW8424SX Series User Manual Page 30