Yamaha CRW3200E Owner's Manual download pdf (Page 31)

Preparing the CRW3200E Drive

If the drive name is not shown or there is or mark.

The CRW3200E drive has not been recognized properly. Check the cable

connections and the master/slave settings of the IDE devices connected to

the computer.

When using Windows 2000 Professional

Select Start on the taskbar, then Settings, Control Panel, Hardware

tab, and Device manager. The Device Manager dialog box appears.

If there is to the left of DVD/CD-ROM Drive, click .

YAMAHA CRW3200E should be shown when the CRW3200E drive

has been recognized properly.

When using Windows XP

Select Start on the taskbar, then Control Panel, System, Hardware

tab, and Device manager. The Device Manager dialog box appears.

If the

System

icon is not found in the

Control Panel

window, click

Switch to Classic View

on the left side of the window.

If there is to the left of DVD/CD-ROM Drive, click .

YAMAHA CRW3200E should be shown when the CRW3200E drive

has been recognized properly.

Change the DMA setting.

The DMA setting may not be displayed, depending on your computer. In

such a case, you can use the CRW3200E drive without changing the

DMA setting.

Tip

To maximize the performance of the CRW3200E drive, Yamaha recommends

that you also change the DMA setting of your hard drive.

Note

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 49 50

No comments

Yamaha CRW3200E Owner's Manual Page 31