Yamaha NUAGE Firmware User Manual download pdf (Page 10)

NUAGE Firmware Update Guide 10

Be sure to ensure compatibility of the update files with Nuage I/O. If update files other than Nuage I/O are

applied, the device will become inoperable. In general, do not check the [Override Device Matching] option. If

this option is left unchecked, only devices that support the file can be selected, ensuring that updating the

device with invalid or wrong files is prevented.

5. Click [Next].

・Dante Firmware Update Manager may be blocked by the Windows Firewall. Select the [Private Network]

checkbox and click [Allow access].

6. Check the Nuage I/O to update.

Check the version of the update files and the version number indicated in the Nuage I/O line.

・If the Nuage I/O is not indicated, click [Refresh]. If it is still not indicated after that, the computer and the

Nuage I/O are not connected properly. Check that the cable is not loose or disconnected, TCP/IP is properly

configured, and the Nuage I/O is powered on.

7. Click [Start].

The update operation will begin.

“Updating(n/m)” appears in the Status field during updating. “Done” is displayed once update is completed.

Update takes 2 to 4 minutes. During the update operation, do not turn off the power to the unit or disconnect the

cable. If update fails due to disconnection of the power cable during the update, or due to other reasons, the device

may become inoperative.

・If update is not completed after 5 minutes, or update failure indication appears, exit the Dante Firmware Update

Manager program without turning the Nuage I/O power off, and restart the procedure from the step 4. If update

still fails, follow the instructions stated in “About Failsafe Mode” to perform the recovery processing.

8. Restart the Nuage I/O.

The firmware update is now complete.

1 2 ... 5 6 7 8 9 10 11 12

No comments

Yamaha NUAGE Firmware User Manual Page 10