Yamaha MY16 Owner's Manual download pdf (Page 11)

Bundle Numbers

Set the appropriate bundle numbers using one of the methods described below to allow transfer

of audio signals between transmitting and receiving devices.

 Connecting Multiple MY16-CII Cards Only via Matrix View

This method selects the bundle numbers automatically and is only useful for setting up bundles

that will be transmitted and received between the MY16-CII cards displayed in the Matrix View.

1. Click on the Matrix View to create a connection or “point,” as described below.

When a connection is created, bundle numbers are set for the transmitting and receiving

devices, allowing audio signal transfer. “Tx” is the transmit bundle and “Rx” is the receive

bundle. The numbers following Tx or Rx are the socket numbers that indicate the order of

the transmit and receive bundles.

When a new connection point is created, unicast bundles (black lines) are specified by default.

Note: Audio signals cannot be transferred if the latencies of the transmitting and receiving

devices differ. Set the same latency for both devices via the “Yamaha Device Settings” window

(page 16).

Figure 8: Matrix View

CobraNet Manager Lite for Yamaha Owner’s Manual 11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

No comments

Yamaha MY16 Owner's Manual Page 11