Yamaha P90 Owner's Manual download pdf (Page 37)

P-90 Detailed Settings – [FUNCTION]

ENGLISH

You can set various parameters for Dual mode

to optimize the settings for the songs you play,

such as adjusting the volume balance between

two voices.

Dual mode function settings are set individu-

ally for each voice combination.

1. Select the voices in Dual mode and engage

Function mode and select .

2. Press the [+/YES] button to engage the Dual

mode function’s sub-mode, then use the

[TEMPO/FUNCTION# ▼, ▲] buttons to select

the desired sub-mode. Press the [–/NO] [+/

YES] button to assign values.

If Dual mode is not engaged, will appear instead of

and you will be unable to select Dual mode functions.

You can switch from Function mode to Dual mode.

Sub-mode

F3.1: Dual Balance

Setting range: 0 – 20

A setting of “10” produces an equal balance between

the two Dual mode voices. Settings below “10”

increase the volume of Voice 2 in relation to Voice 1,

and settings above “10” increase the volume of Voice 1

in relation to Voice 2.

Normal setting: Different for each voice combina-

tion.

You can set one voice as the main voice, and another

voice as a softer, mixed voice.

F3.2: Dual Detune

Setting range: -10 – 0 – 10

With positive values, the pitch of Voice 1 is raised and

the pitch of Voice 2 is lowered. With negative values,

the pitch of Voice 1 is lowered and the pitch of Voice 2

is raised.

The available setting range is wider in the lower range (± 60

cents for A-1), and narrower in the higher range (± 5 cents for

C7). (100 cents equal one semitone.)

Normal setting: Different for each voice combina-

tion.

Detune Voice 1 and Voice 2 for Dual mode to create a

thicker sound.

F3.3: Voice 1 Octave Shift

F3.4: Voice 2 Octave Shift

Setting range: –1, 0, 1

Normal setting: Different for each voice combina-

tion.

You can shift the pitch up and down in octave steps for

Vo ice 1 and Voice 2 independently. Depending on which

voices you combine in Dual mode, the combination may

sound better if one of the voices is shifted up or down an

octave.

F3.5: Voice 1 Effect Depth

F3.6: Voice 2 Effect Depth

Setting range: 0 – 20

Normal setting: Different for each voice combina-

tion.

These functions make it possible to individually set the

depth of the effect for Voices 1 and 2 for Dual mode.

(The effect depth settings cannot be changed unless the

[EFFECT] is ON. Function mode must be exited before

the [EFFECT] can be turned ON.)

•“Vo ice 1” and “Voice 2” are explained on page 23.

F3.7: Reset

This function resets all Dual mode functions to their

default values. Press the [+/YES] button to reset the val-

ues.

SHORTCUT:

You can jump directly to the Dual mode functions by

pressing the [FUNCTION] button while holding the two Dual

mode voice buttons.

Even if you entered a Function mode via a shortcut, you must

use the usual method to exit (i.e., press [FUNCTION] button

to make the function indicator go dark).

F3. Dual Mode Functions

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 63 64

Comments to this Manuals

No comments

Yamaha P90 Owner's Manual Page 37

Comments to this Manuals

Related products and manuals for Musical Instruments Yamaha P90