Yamaha NP-V80 Owner's Manual download pdf (Page 11)

Setting Up

Owner’s Manual

Setting Up

Make all necessary connections below BEFORE turning the power on.

Connecting Headphones

(PHONES/OUTPUT Jack)

Any pair of stereo headphones with a 1/4" stereo

phone plug can be plugged in here for convenient

monitoring. The speakers are automatically shut off

when a plug is inserted into this jack.

The PHONES/OUTPUT jack also functions as an

external output. You can connect the PHONES/OUT-

PUT jack to a keyboard amplifier, stereo system,

mixer, tape recorder, or other line-level audio device

to send the instrument’s output signal to that device.

Connecting a Footswitch or a

Foot Pedal (SUSTAIN Jack)

The SUSTAIN jack is for connecting the footswitch or

foot pedal. The pedal functions in the same way as a

damper pedal on an acoustic piano. Connect an

included footswitch (NP-V80 only) or an optional

footswitch FC4/FC5 to this jack and press the pedal to

sustain the sound. An optional FC3 foot pedal can

also be connected to this jack.

If you connect an optional pedal of FC3, the half

pedal function* can be used.

* half pedal function

While you playing the piano with SUSTAIN and if you need to

delete the cloudy sound, release the foot from pedal to half posi-

tion.

Turning the Power On

The [ ](Standby/On) switch turns the power to the

instrument on or standby. Turn down the volume by

turning the [MASTER VOLUME] control to the left

and press the [ ](Standby/On) switch to turn on the

power. Press the [ ](Standby/On) switch again to

turn the power standby.

While playing the keyboard, adjust the volume level

by using the [MASTER VOLUME] control.

• Avoid listening with the headphones at high volume for

long periods of time; doing so may not only result in ear

fatigue, it may be damaging to your hearing.

• To prevent damage to the speakers, set the volume of the

external devices at the minimum setting before connecting

them. Failure to observe these cautions may result in elec-

tric shock or equipment damage. Also, be sure to set the

volumes of all devices at their minimum levels and gradu-

ally raise the volume controls while playing the instrument

to set the desired listening level.

WARNING

CAUTION

• The sustain function does not affect split voices.

• Make sure that power is OFF when connecting or discon-

necting the pedal.

• Do not press the pedal while turning the power on. Other-

wise, the switch or pedal type (on/off) will be reversed.

• Even when the switch is standby, electricity is still flowing

to the instrument at the minimum level. When you are not

using the instrument for a long time, make sure you

unplug the AC power adaptor from the wall AC outlet, and/

or remove the batteries from the instrument.

NOTE

CAUTION

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 103 104

Comments to this Manuals

No comments

Yamaha NP-V80 Owner's Manual Page 11

Comments to this Manuals

Related products and manuals for Musical Instruments Yamaha NP-V80