Yamaha YAS-306 Owner's Manual download pdf (Page 29)

SETTINGS ➤ Using an external subwoofer En 29

The unit has dual built-in subwoofers; however you can connect an external subwoofer

when you want to enhance low frequency sound. Connect a subwoofer to the

SUBWOOFER OUT jack of the unit. Sound is output from both the built-in subwoofers

and external subwoofer.

NOTE

• Use an external subwoofer with built-in amplifier.

Enabling the auto power standby function prevents the unit from remaining on when not

in use.

NOTE

• By default, the auto power standby function is enabled on Europe and U.K. models, and disabled on other

models.

• When the auto power standby function is enabled, the unit automatically turns off in any of the following

situations.

− No operations for 8 hours

− No audio input and no operations for 20 minutes when BLUETOOTH or NET is selected as the input

source.

1 Turn off the unit.

2 Hold down the key and press the key on the unit.

The auto power standby function is enabled or disabled, and the unit turns on. For

several seconds immediately after the unit is turned on, the indicator shows auto

power standby function status.

Using an external subwoofer

SUBWOOFER OUT

RCA mono cable (optional)

Mono input

Enabling/disabling the auto power standby

function

CONNECT

Off (enabled), glows (disabled)

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

No comments

Yamaha YAS-306 Owner's Manual Page 29