Yamaha MW12CX Owner's Manual download pdf (Page 20)

Front & Rear Panels

MW12CX/MW12C Owner’s Manual

Reference

Digital Effect * Only the MW12CX has digital effects.

MW12CX

1 FOOT SWITCH Jack

A Yamaha FC5 foot switch (sold separately) can be connected to this jack and used

to toggle the digital effects ON and OFF.

2 PROGRAM Dial

Selects one of the 16 internal effects. See page 21 for details about the internal

effects.

3 PARAMETER Control

Adjusts the parameter (depth, speed, etc.) for the selected effect.

The last value used with each effect type is saved.

When you change to a different effect type, the mixer automatically restores

the value that was previously used with the newly selected effect (regard-

less of the current position of the PARAMETER Control knob).

These parameter values are reset when the power is turned off.

4 AUX Control

Adjusts the level of the signal sent from the internal digital effect unit to the AUX

bus.

The EFFECT RTN fader does not affect the level of the signal sent to the

AUX bus.

5 ON Switch

Switches the internal effect on or off. The internal effect is applied only if this

switch is turned on. The switch lights orange when on.

An optional Yamaha FC5 foot switch (sold separately) can be used to toggle the

digital effects ON and OFF.

The ON switch lights and the internal effect unit is active by default when

the power is initially turned on.

6 PFL Switch

Turn this switch on to send the effect signal to the PFL bus.

7 EFFECT RTN Fader

Adjusts the signal level sent from the internal digital effect unit to the STEREO

bus.

NOTE

Rear Input/Output Section

1 POWER Switch

Use this switch to turn the mixer’s power ON or to

STANDBY mode.

Note that a small current continues to ﬂow while

the switch is in the STANDBY position. If you do

not plan to use the mixer for a while, be sure to

unplug the AC adaptor from the wall outlet.

2 AC ADAPTOR IN Connector

Connect the supplied power adaptor to this connector (see

page 6).

3 USB Connector

Connects to the computer via the included cable. The USB

connector outputs the same signal as the REC OUT jacks.

When connecting or disconnecting the USB

cable be sure to turn the 2TR IN/USB control all

the way down.

1 2

CAUTION

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 33 34

Comments to this Manuals

No comments

Yamaha MW12CX Owner's Manual Page 20

Comments to this Manuals

Related products and manuals for Musical Equipment Yamaha MW12CX