Yamaha M7CL Owner's Manual download pdf (Page 28)

M7CL Editor Owner’s Manual

K ATT (Attenuation)

Adjusts the amount of attenuation/gain.

❏ DYNAMICS1/2

You can select one of the following types for each of the two dynamics processors.

If GATE/DUCKING is selected

A TYPE

Indicates the type of the currently selected gate. You can click here to select the type.

B LIBRARY

This button accesses the dynamics library. Clicking this button will open the DYNAMICS page of the LIBRARY

window.

C ON

This button switches the gate on/off.

D Response curve

Indicates the response for the gate of the currently selected channel.

E GR meter

This meter indicates the amount of gain reduction.

F THRESHOLD (Threshold level)

Speciﬁes the level at which the gate will open and close. The gate will open when the key-in signal exceeds this

level, and will close when the signal falls below this level.

G RANGE

Speciﬁes the amount by which the signal is attenuated while the gate is closed.

H DECAY

Speciﬁes the time over which the gate will close after the hold time has elapsed.

I ATTACK

Speciﬁes the time from when the key-in signal exceeds the threshold level until the gate opens.

DYNAMICS1: GATE, DUCKING, EXPANDER, COMPRESSOR

DYNAMICS2: COMPRESSOR, COMPANDER-H, COMPANDER-S, DE-ESSER

1 235

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 71 72

No comments

Yamaha M7CL Owner's Manual Page 28