Yamaha REV-5 Specifications download pdf (Page 3)

Precautions

6. Clean with a soft dry cloth.

Never use solvents such as benzine or thinner to

clean the REV500. Wipe the unit clean with a soft,

dry cloth.

7. Always use the correct power supply.

Make sure that the power requirements listed on the

rear panel of the REV500 match your local AC

mains

8. Have the back-up battery replaced regularly.

The REV500 has a long-life lithium battery that

maintains the contents of the user memory even

when the REV500 is off. Under normal use, the

battery should last several years. However, Yamaha

strongly recommends that you have the battery

replaced by a qualified Yamaha service center

every five years, to prevent the accidental loss of

valuable data.

Should the battery’s voltage fall below a certain

level, the message “LOW BATTERY” will appear in

the LCD when you turn the REV500 on. If this

happens, it means that contents of your REV500’s

user memory have been lost. Have the backup

battery replaced immediately.

Prompt and regular replacement of the back-up

battery is necessary to prevent the loss of important

data. In addition, if possible, you should use the

MIDI bulk dump function (see page 17) regularly to

store backup copies of your REV500’s data in a

MIDI sequencer other MIDI device. This will allow

you to recover your data should the back-up battery

run down sooner than you think.

1. Select a suitable location.

Keep the REV500 away from locations where it is

likely to be exposed to high temperatures or

humidity—such as near radiators, stoves, etc. Also

avoid locations which are subject to excessive dust

accumulation or vibrations that could cause

mechanical damage, and locations subject to strong

electromagnetic fields such as those produced by

broadcast equipment.

2. Avoid physical shocks.

Strong physical shocks can damage the REV500.

Handle the REV500 with care.

3. Do not open the case or attempt repairs or

modifications yourself.

This product contains no user-serviceable parts.

Refer all maintenance and repair work to qualified

Yamaha service personnel. Opening the case and/

or tampering with the internal circuitry voids the

warranty.

4. Always turn the power off before making

connections.

Always turn the power OFF before connecting or

disconnecting cables. Failure to do so may damage

the REV500 as well as other connected equipment.

5. Handle cables carefully.

Always grip the connector, not the cord itself, when

plugging and unplugging cables (including the AC

power cord).

1 2 3 4 5 6 7 8 ... 27 28

Comments to this Manuals

No comments

Yamaha REV-5 Specifications Page 3

Comments to this Manuals

Related products and manuals for Music Pedal Yamaha REV-5