Yamaha RS65S Owner's Manual download pdf (Page 2)

Printed in Indonesia

* Parts for the RS65S's main structure have already been assembled before packing. After removing the unit from the box, follow

the instructions described below to complete the assembly.

A Phillips (+) screwdriver is required when attaching the DTXPRESS

module. Please prepare one before starting assembly.

■ RS65S Assembly

Drum Pad

Step 3-2

Step 3-1

Cymbal Pad

Cymbal Holder

Left Leg Assembly

Right Leg Assembly

Module Holder Assembly

Side Arm (L) Assembly

Side Arm (R) Assembly

DTXPRESS

Holder

Clamp

Module

Holder

Drum Pad

Clamp

After removing the unit from the box, remove all cushion material.

Setting up the parts

• Loosen the bolts on the movable arms and legs, as shown in the dia-

grams below, then secure the bolts firmly once setting is complete.

Follow the setup order (q-u) in the diagrams shown below.

Caution : Make sure the bolts marked with a " " are loosened before

setting up.

Attaching the DTXPRESS

3-1 Remove the module holder from the holder clamp, and use the

supplied screws to attach the DTXPRESS

Make sure only the supplied screws are used. Using any other

screws may result in the unit falling off the holder or damage.

3-2 Reattach the module holder to the holder clamp.

Attaching the cymbal pads

Attach the cymbal pads to the cymbal holders and adjust their position,

then secure in place. (Please refer to the Owner's Manual that came

with the cymbal pads on attaching the cymbal pads.)

Attaching the drum pads

Attach drum pads to the hexagonal rod cylinder and adjust their posi-

tion, the secure in place.

The hi-hat drum pad clamp can

also be attached to this arm.

Make sure all bolts on clamps, pads, etc., are firmly tightened.

Loose or over-tightened bolts may result in the part falling off and/or dam-

age. Please use caution.

After assembly is complete, setup the kick pad, hi-hat control pedal, etc., and

connect the cables. Use the supplied cable bands to secure the cables to the

frame pipes to keep cables out of the way during performance.

If the rack is moved even after setup is complete, make sure the bolts are

loosened before moving the rack.

Caution

V992380

Step 4

Step 5

1 2

PRECAUTIONS 1
Printed in Indonesia 2

Comments to this Manuals

No comments

Yamaha RS65S Owner's Manual Page 2

Comments to this Manuals

Related products and manuals for Music drums Yamaha RS65S