Yamaha YFZ450X Owner's Manual download pdf (Page 116)

8-7

EBU13931

Engine oil and oil filter element

The engine oil level should be checked before

each ride. In addition, the oil must be changed

and the oil filter element replaced at the inter-

vals specified in the periodic maintenance

and lubrication chart.

To check the engine oil level

1. Place the ATV on a level surface.

2. Start the engine, warm it up until the en-

gine oil has reached a normal tempera-

ture of 40 °C (104 °F), let it continue to

idle for ten seconds or more, and then

turn the engine off.

NOTE:

To achieve the proper engine oil temperature

for an accurate oil level reading, the engine

must have first completely cooled down, and

then warmed up again for several minutes to

normal operating temperature.

3. Remove the engine oil tank filler cap,

wipe the dipstick clean with a clean rag,

insert it back into the filler hole (without

screwing it in), and then remove it again

to check the oil level.

1. Engine oil tank 2. Engine oil tank filler cap 3. Dipstick

4. Maximum level mark 5. Minimum level mark

6. Engine oil filler cap

NOTE:

The engine oil should be between the mini-

mum and maximum level marks.

U5TG10.book Page 7 Monday, April 7, 2003 8:50 PM

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 187 188

DarrickReula 05 Mar 2024 | 19:04:33

Hello Guys, Glad to Join! :)

Yamaha YFZ450X Owner's Manual Page 116