Yamaha 2013 Stryker Owner's Manual download pdf (Page 23)

100

INSTRUMENT AND CONTROL FUNCTIONS

4-6

The fuel level warning light comes on

and the display switches to the fuel re-

serve tripmeter mode “Trip F” when the

fuel level is very low. Refuel as soon as

possible to avoid running out of fuel.

To set the clock

1. Push the “SELECT” switch to

change the display to the clock

mode.

2. Push the “SELECT” and “RESET”

switches together for at least three

seconds.

3. When the hour digits start flashing,

push the “SELECT” switch to set

the hours.

4. Push the “RESET” switch, and the

minute digits will start flashing.

5. Push the “SELECT” switch to set

the minutes.

6. Push the “RESET” switch and then

release it to start the clock.

Self-diagnosis device

This model is equipped with a self-diag-

nosis device for various electrical cir-

cuits.

If a problem is detected in any of those

circuits, the engine trouble warning light

will come on and the display will indi-

cate an error code.

If the display indicates any error codes,

note the code number, and then have a

Yamaha dealer check the vehicle.

NOTICE

ECA11590

If the display indicates an error

code, the vehicle should be checked

as soon as possible in order to avoid

engine damage.

Brightness control mode

This function allows you to adjust the

brightness of the multi-function meter

unit panel to suit the outside lighting

conditions.

To set the brightness

1. Turn the key to “OFF”.

2. Push and hold the “SELECT”

switch.

1. Clock

1. Engine trouble warning light “ ”

2. Error code display

1 2

1. Brightness level

U27D12E0.book Page 6 Wednesday, May 9, 2012 3:31 PM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 99 100

Comments to this Manuals

No comments

Yamaha 2013 Stryker Owner's Manual Page 23

Comments to this Manuals

Related products and manuals for Motorcycles Yamaha 2013 Stryker