Yamaha NS-IW960 Specifications download pdf (Page 6)

CONNECTIONS

• Connect the push-type input terminals at the rear of the speakers to the speaker output terminals of the

receiver.

Connect the (+) terminals on the receiver and speakers using the corresponding side of the cable. Connect

the (−) terminals on both components using the other side of the cable.

•

How to connect

1 Press and hold down the speaker terminal.

2 Insert the bare wire.

3 Release the terminal. Test the firmness of the

connection by pulling lightly on the cable at the

terminal.

Remove the insulation

coating at the extremity of each speaker cable

by twisting the coating off.

Notes:

• Make sure that the bare wires are not touching each other as this could damage the speaker and receiver.

• Connect one speaker to the left terminals of your receiver, and another speaker to the right terminals,

making sure no to reverse the polarity (+, −). If one speaker is connected with reversed polarity, the sound

will be unnatural and lack bass.

Receiver

NS-IW960

•

When using a banana plug

Insert the banana plug into the top of the

terminal as shown below:

Banana plug

+−

−+

Black (−)

Red (+)

(−)

(+)

1 2 3 4 5 6 7 8

No comments

Yamaha NS-IW960 Specifications Page 6