Yamaha NS-IW470 Owner's Manual download pdf (Page 6)

NS-IW470

CONNECTIONS

Connect the screw-type input terminals at the rear of the speakers to the speaker output terminals of the

receiver.

Connect the (+) terminals on the receiver and speakers using the corresponding side of the cable. Connect

the (–) terminals on both components using the other side of the cable.

Notes:

Make sure that the bare wires are not touching each other as this could damage the speaker and receiver.

Connect one speaker to the left terminals of your receiver, and another speaker to the right terminals,

making sure not to reverse the polarity (+, –). If one speaker is connected with reversed polarity, the sound

will be unnatural and lack bass.

How to connect

1 Hold down the knob.

2 Insert the bare wire. Remove the insulation

coating at the extremity of each speaker cable

by twisting the coating off.

3 Release the knob. Test the firmness of the

connection by pulling lightly on the cable at the

terminal.

When using a banana plug

Insert the banana plug into the terminal. Test the

firmness of the connection by pulling lightly on the

cable at the terminal.

NS-IW470

Receiver

Banana plug

Red (+)

Black (–)

(–)

(+)

1 2 3 4 5 6 7 8

No comments

Yamaha NS-IW470 Owner's Manual Page 6