Yamaha NEXO GeoSight User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 20
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
Page 4
- Safety Instructions
- NEXO GeoSight User Manual
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions for future reference and give a copy of them to any other
person who may need to use your GeoSight system.
3) Follow all instructions and heed all warnings.
4) Do not use this apparatus near water.
5) Clean only with dry cloth.
6) Do not use near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampli ers) that produce heat.
7) Only use attachments/accessories speci ed by the manufacturer.
8) Unplug this apparatus during lightning storms or when unused for long periods of
time.
9) Refer all servicing to quali ed service personnel. Servicing is required when the
apparatus has been damaged in any way, if liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
CLASS 2 Laser. This symbol indicates potential hazard
MOST IMPORTANT – safety precautions when using laser equipment.
• NEVER look directly into the laser, even when it is switched off, as someone may
activate it without warning.
• WARN others in the venue that you are going to use a laser and move them away
from the target area before activating the GeoSight.
• Ensure that others do not enter the target area of the laser whilst it is in use and
ensure that the meter unit is to hand at all times so that the beam can be switched off
immediately if necessary.
• Use the laser for the minimum amount of time and switch off as soon as the
measurement is complete. Disconnect the cable from the Meter Unit as soon as
possible and ALWAYS ensure that the Meter Unit is
disconnected when the public have access to the
venue.
• NEVER use the laser in any other application than
it is designed. DO NOT operate the laser when
hand holding the Sender Unit. There are serious
penalties for using a laser in any manner that may
cause accident or injury.
!! Particularly it is VERY dangerous to point the
laser at vehicles or aircraft !!
NEXO GeoSight User Manual - GeoSight Speci cations
- Page 17
GEOSIGHT SPECIFICATIONS
Part No. MMT SST LST LMT BST 30CT
Item Description Meter Unit Standard
Sender Unit
Sender Unit
with Laser
Module
Laser Module
Option
Sender Unit
Mounting
Bracket
30m
Cable
Accessories (included)
6 x MN1500
battery
4no. M3 x 10
Cap screws
4no. M5 x 15
Cap screws
4no. M5 S/p
washer
2no. Foam
rubber strip
1no. CTL
adapter
Size
Length
245mm
160mm
160mm
164mm
30m
Width
101.6mm
76.2mm
76.2mm
120mm
Height
50.8mm
50.8mm
50.8mm
57mm
Weight
1.20Kg
0.55Kg
0.60Kg
0.05Kg
0.45Kg
1.145Kg
Power Consumption
Inclinometer only
-
255mW
255mW
-
-
-
Backlight on full
-
495mW
495mW
-
-
-
Laser on
-
-
1800mW
-
-
-
Battery Life (est)
Inclinometer only
-
100 hours
100 hours
-
-
-
Backlight on full
-
50 hours
50 hours
-
-
-
Laser on
-
-
14 hours
-
-
-
Laser Class
Class 2 /
IEC825
Wavelength
532nm
Maximum Output
Power
<5 mW
Beam Diameter (1/e2)
<1 mm
Beam divergence
<1.4mrad
Mean time to failure
(based upon laser
diode manufacturer’s
gures)
>5000 hours
NEXO reserves the right to change speci cations without notice.
DECLARATION OF CONFORMITY
This equipment has been tested and found to comply with the safety objectives and
essential requirements of the 73/23/EEC and 89/336/EEC directives:
EN 60065 (1998) Audio, video and similar electronic apparatus - Safety requirements,
EN55103-1 (1996) Electromagnetic compatibility - Product family standard for audio,
video, audio-visual and entertainment lighting control apparatus for professional use
– Part 1: Emission,
EN55103-2 (1996) Electromagnetic compatibility - Product family standard for audio,
video, audio-visual and entertainment lighting control apparatus for professional use
– Part 2: Immunity.
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments